10SVPC330M

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 10 В x 330 мкФ ±20%, SMD, -55...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии SVPC_OSCON

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ JCK1C331M080105 (JB)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ CA010M0330REF-0810 (YAG)
 

ECAPSMD 330/10V 0810 CA (YAG) 		— в ленте 500 шт конденсатор алюминиевый SMD 330 мкФ 10 В -40...85 °C 2000 ч — — — Surface Mount Aluminum electrolytic
A+ CA016M0330REF-0810 (YAG)
 

ECAPSMD 330/16V 0810 CA (YAG) 		— в ленте 500 шт конденсатор алюминиевый SMD 330 мкФ 16 В -40...85 °C 2000 ч — — — Surface Mount Aluminum electrolytic
A+ CD016M331F10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ EEEFK1A331P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFK1C331P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFNA331XUP (PAN)
 
— в ленте 900 шт — — — — V-FN, 10V, 330uF, 105°C, 2000h, 6.3x7.7mm, ripple 280mArms, 0.34Ohm
A+ EEEFP1A331AP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFTC331XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2626
A+ EEETC1A331P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEETC1C331P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEETP1A331AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEETP1C331AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEE1AA331P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ 10SVP330MX (PAN)
 
— в ленте 500 шт — — — —
A+ EEETPA331UAP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ 16SVP330M (PAN)
 
— в ленте 400 шт — — — —
A+ VP010M331E9BPKKKV00R (SUSCON)
 
— — — — — — —
A+ CDL016M331F10PKKKV00R (SUSCON)
 
— — — — — — —
A+ CDS016M331E7DPKKKV00R (SUSCON)
 
— — — — — — —
A+ EEETC1A331UP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEETC1A331UV (PAN)
 
— 500 шт
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFH1A331L (PAN)
 
— 500 шт
 
 — — — V-FH / 10V / 330uF / 105°C / 10000h / 8x10.2mm / ripple 600mArms / ESR 0.2Ohm
A+ EEETC1A331V (PAN)
 
— 500 шт
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141

Сопутствующие товары 23

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-E010K337T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45-D010K337T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
10TPB330M (PAN)
 
— в ленте 2000 шт — —
10TPE330M (PAN)
 
— в ленте 2000 шт — —
CA45-V010M337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45L-E020K337TE450 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E016M337TE180 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E016K337TE180 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E010M337TE150 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E010K337TE150 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-D010M337TE150 (XIANGYEE)
 
TANT73433173X43X31MM
 
 TANT73433173X43X31MM —
CA45L-D010K337TE150 (XIANGYEE)
 
TANT73433173X43X31MM 500 шт
 
 TANT73433173X43X31MM —
CA45-V020M337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V020K337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V016M337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V016K337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V010K337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-E020M337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E020K337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E016M337T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45-E016K337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E010M337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-D010M337T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —

Файлы 4

показать свернуть
Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPC series Features ● Low ESR (9 mΩ max.) ● Large capacitance (2700 μF max.) ● RoHS compliance, Halogen free Specifications Size code B6 C6 Category temp. range Rated voltage range 39 μF to 180 μF 68 μF to 560 μF Capacitance tolerance Dissipation factor (tan δ) Dissipation factor (tanδ) ≦ 150 % of the initial limit Within the initial limit +60 ℃, 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Dissipation factor (tanδ) ≦ 150 % of the initial limit Within the initial limit (after voltage processing) Dimensions (not to scale) 0.2 max. Polarity marking (−) H øD Series code* ⊕ L R. capacitance (μF) W ⊖ Lot No. Size code B6 C6 E7 E12 F12 C Marking * Depends on the case size. 2700 μF Please see the attached characteristics list DC leakage current R. voltage (V) 270 μF to 1500 μF 2.5 V 120 μF to 680 μF +105 ℃ 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value DC leakage current Damp heat (Steady state) F12 ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list DC leakage current Endurance E12 P Nominal cap.range E7 –55 ℃ to +105 ℃ 2.5 V to 16 V R Unit：ｍｍ øD±0.5 +0.1 L -0.4 W±0.2 H±0.2 C±0.2 R P*1 5.0 6.3 8.0 8.0 10.0 5.9 5.9 6.9 11.9 12.6 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 0.6 to 0.8 1.4 2.1 3.2 3.2 4.6 0.6 to 0.8 0.6 to 0.8 0.8 to 1.0 0.8 to 1.0 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Feb-17 PDF
Документация на 10SVPC330M 

Series catalog

Дата модификации: 07.12.2021

Размер: 464.6 Кб

7 стр.

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPC Features ● Low ESR (9 mΩ to 30 mΩ) capacitance (2700 μF max.) ● RoHS compliance, Halogen free ● Large Specifications Size code B6 C6 E7 E12 Category temperature range –55 °C to +105 °C Rated voltage range 2.5 V.DC to 16 V.DC Rated capacitance range 39 μF to 180 μF 68 μF to 560 μF 120 μF to 680 μF 270 μF to 1500 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking F12 2.5 V.DC 2700 μF Dimensions (not to scale) 0.2 max. W Polarity marking (−) Lot. No. C H fD P – + L R Series R. Capacitance R. Voltage Unit : mm Size code fD±0.5 B6 C6 E7 E12 F12 5.0 6.3 8.0 8.0 10.0 L +0.1 −0.4 5.9 5.9 6.9 11.9 12.6 W±0.2 H±0.2 C±0.2 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 R P±0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 1.4 2.1 3.2 3.2 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Feb. 2017 PDF
Документация на серию SVPC_OSCON 

CON_CAP_SVPC_e.indd

Дата модификации: 27.03.2019

Размер: 202.8 Кб

3 стр.

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPC Features ● Low ESR (9 mΩ to 30 mΩ) capacitance (2700 μF max.) ● RoHS compliance, Halogen free ● Large Specifications Size code B6 C6 E7 E12 Category temperature range –55 °C to +105 °C Rated voltage range 2.5 V.DC to 16 V.DC Rated capacitance range 39 μF to 180 μF 68 μF to 560 μF 120 μF to 680 μF 270 μF to 1500 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking F12 2.5 V.DC 2700 μF Dimensions (not to scale) 0.2 max. W Polarity marking (−) Lot. No. C H fD P – + L R Series R. Capacitance R. Voltage Unit : mm Size code fD±0.5 B6 C6 E7 E12 F12 5.0 6.3 8.0 8.0 10.0 L +0.1 −0.4 5.9 5.9 6.9 11.9 12.6 W±0.2 H±0.2 C±0.2 5.3 6.6 8.3 8.3 10.3 5.3 6.6 8.3 8.3 10.3 6.0 7.3 9.0 9.0 11.0 R P±0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 1.4 2.1 3.2 3.2 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Feb. 2017 PDF
Документация на 10SVPC330M 

CON_CAP_SVPC_e.indd

Дата модификации: 13.02.2019

Размер: 55.9 Кб

2 стр.

2019 Products Catalog Conductive Polymer Aluminum Solid Capacitors PDF
Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)