Вход / Регистрация

Серия DC-AC инверторов TS-1000

MEAN WELL

Общие характеристики

 Раздел DC-AC инверторы
Выходная мощность
Форма выходного напряжения
Размер 345×184×70 мм

Документация на серию TS-1000

TS-1000 1000W True Sine Wave DC-AC Power Inverter ■ Features : series User’s Manual True sine wave output (THD<3%) High surge power up to 2000W High efficiency up to 92% Power ON-OFF switch Standby saving mode can be selected Front panel indicator for operation status Built-in fan ON-OFF control function Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 3 years warranty E13 UL458 (for 112/124 type F only) SPECIFICATION TS-1000-112 MODEL NO. TS-1000-124 TS-1000-148 = A, F RATED POWER (Typ.) TS-1000-212 TPTC004 IEC62368-1 (for 212/224/248 only) TS-1000-224 TS-1000-248 = B, C, D 1000W MAXIMUM OUTPUT POWER (Typ.) 1150W for 180 sec. / 1500W for 10 sec. / surge power 2000W for 30 cycles Factory setting set at 110VAC AC VOLTAGE OUTPUT FREQUENCY Note.8 60±0.1Hz WAVEFORM Note.6 True sine wave (THD<3%) 50/60Hz selectable by setting button S.W AC REGULATION (Typ.) ±3.0% SAVING MODE (Typ.) Default disabled. Load≦5W will be changed to standby mode 200 / 220 / 230 / 240VAC selectable by setting button S.W 50±0.1Hz FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V 24V 50/60Hz selectable by setting button S.W 48V 12V 24V 48V 42 ~ 60VDC 25A 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 100A 50A 25A 89% Open & sealed lead acid 90% 90% 91% 92% 40A*4 11.3±4% 40A*2 22.5±4% 20A*2 45±4% 40A*4 11.3±4% 40A*2 22.5±4% 20A*2 45±4% 10.5±4% 21±4% 42±4% 10.5±4% 21±4% 42±4% VOLTAGE RANGE (Typ.)Note.4,6 10.5 ~ 15VDC DC CURRENT (Typ.) 100A INPUT Factory setting set at 230VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W 21 ~ 30VDC 50A NO LOAD DISSIPATION (Typ.) ≦6W @ standby saving mode OFF MODE CURRENT DRAW ≦1mA EFFICIENCY (Typ.) Note.1 88% BATTERY TYPES FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN REVERSE POLARITY By internal fuse open Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover GFCI PROCTECTION ENVIRONMENT WORKING TEMP. WORKING HUMIDITY Optional (Only type F) SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF OTHERS NOTE None Note.3 0 ~ +40℃ @ 100% load ; +60℃ @ 50% load STORAGE TEMP., HUMIDITY VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 70℃± 5℃ 90℃± 5℃ OVER TEMPERATURE 20% ~ 90% RH non-condensing -30 ~ +70℃ / -22 ~ +158oF, 10 ~ 95% RH non-condensing 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes IEC62368-1 CB, EAC TP TC 004 approved; Design refer to BS EN/EN62368-1 UL458 (only for "GFCI" receptacle-Type F ), EAC TP TC 004 EAC TP TC 004 Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EAC TP TC 020 Compliance to FCC class A, EAC TP TC 020 Compliance to EAC TP TC 020 66.9K hrs min. Compliance to BS EN/EN61000-4-2,3,8, EAC TP TC 020 MIL-HDBK-217F (25℃) DIMENSION PACKING 345*184*70mm (L*W*H) 4.3Kg; 2pcs/9.6Kg/1.16CUFT COOLING Loading controlled cooling fan for GFCI receptacle-type F ; Thermostatically controlled cooling fan for others. 1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage. 2.All parameters not specified above are measured at rated load, 25℃ of ambient temperature and set to factory setting. 3.Output derating capacity referenced by curve 1. 4.Input derating capacity referenced by curve 2. 5.The tolerance of each voltage value by models is:112/212→±0.5V;124/224→±1V;148/248→±2V 6.THD is tested by 1000W, linear load at 13,26,52V input voltage. 7.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 8.Type F for 60Hz only. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:TS-1000-SPEC 2021-08-27 PDF
Документация на TS-1000-248B 

TS-1000.cdr

Дата модификации: 24.08.2021

Размер: 103.7 Кб

2 стр.

TS-1000 1000W True Sine Wave DC-AC Power Inverter series Features : True sine wave output (THD<3%) High surge power up to 2000W High efficiency up to 92% Power ON-OFF switch Standby saving mode can be selected Front panel indicator for operation status Built-in fan ON-OFF control function Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 2 years warranty E13 SPECIFICATION MODEL TS-1000-124 TS-1000-112 TS-1000-148 TS-1000-212 TS-1000-224 TS-1000-248 1000W RATED POWER (Typ.) MAXIMUM OUTPUT POWER (Typ.) 1150W for 180 sec. / 1500W for 10 sec. / surge power 2000W for 30 cycles Factory setting set at 110VAC Factory setting set at 230VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W 200 / 220 / 230 / 240VAC selectable by setting button S.W FREQUENCY 60 0.1Hz 50 0.1%Hz WAVEFORM True sine wave (THD<3%) at rated input voltage AC VOLTAGE OUTPUT SAVING MODE (Typ.) Load FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V VOLTAGE RANGE (Typ.) DC CURRENT (Typ.) 10.5 ~ 15VDC 100A 24V 89% Open & sealed lead acid Note.1 88% BATTERY TYPES FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN REVERSE POLARITY OVER TEMPERATURE OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) GFCI PROCTECTION WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY VIBRATION SAFETY STANDARDS LVD SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE NOTE 12V 24V 48V 42 ~ 60VDC 25A 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 100A 50A 25A 90% 90% 91% 92% 40A*4 11.3 4% 40A*2 22.5 4% 20A*2 45 4% 40A*4 11.3 4% 40A*2 22.5 4% 20A*2 45 4% 10.5 4% 21 4% 42 4% 10.5 4% 21 4% 42 4% By internal fuse open 90 70 5 5 Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode Protection type : Shut down o/p voltage, re-power on to recover 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover Optional (Only type F) 0 ~ +40 @ 100% load ; +60 @ 50% load 20% ~ 90% RH non-condensing -30 ~ +70 None o / -22 ~ +158 F, 10 ~ 95% RH 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes UL458 (only for "GFCI" receptacle-Type F ) None None Bat I/P - AC O/P:3.0KVAC EN60950-1 AC O/P - FG:1.5KVAC AC O/P-FG, Bat I/P-FG:100M Ohms/500VDC / 25 EMI CONDUCTION&RADIATION Compliance to FCC class A None EMS IMMUNITY OTHERS 48V 1mA OFF MODE CURRENT DRAW ENVIRONMENT 5W will be changed to standby mode 21 ~ 30VDC 50A 6W @ standby saving mode NO LOAD DISSIPATION EFFICIENCY (Typ.) 50/60Hz selectable by setting button S.W 3.0% AC REGULATION (Typ.) INPUT 50/60Hz selectable by setting button S.W / 70% RH Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark Compliance to EN61000-4-2,3,8 ENV50204 DIMENSION PACKING 345*184*70mm (L*W*H) 4.3Kg; 2pcs/9.6Kg/1.16CUFT COOLING Loading controlled cooling fan for GFCI receptacle-type F ; Thermostatically controlled cooling fan for others. 1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage. 2.All parameters not specified above are measured at rated load, 25 of ambient temperature. File Name:TS-1000-SPEC 2009-02-07 PDF
Документация на серию TS-1000 

TS-1000.cdr

Дата модификации: 07.05.2009

Размер: 572.7 Кб

2 стр.

PSP-500 500W with PFC and Parallel Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Foced air cooling by built-in DC fan Current sharing up to 2000W(3+1) With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL OUTPUT PSP-500-5 PSP-500-12 PSP-500-13.5 PSP-500-15 PSP-500-24 PSP-500-27 DC VOLTAGE 5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 80A 41.5A 37A 33A 20.8A 18.5A 10.5A CURRENT RANGE 0 ~ 80A 0 ~ 41.5A 0 ~ 37A 0 ~ 33A 0 ~ 20.8A 0 ~ 18.5A 0 ~ 10.5A RATED POWER 400W 498W 499.5W 495W 499.2W 499.5W 504W RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.2V 1.0% 12 ~ 15V 1.0% 13.5 ~ 18V 1.0% 20 ~ 26.4V 1.0% 24 ~ 30V 1.0% 41 ~ 56V 1.0% VOLTAGE TOLERANCE Note.3 LINE REGULATION 0.5% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1500ms, 50ms at full load SETUP, RISE TIME 24ms at full load HOLD TIME (Typ.) VOLTAGE RANGE INPUT Note.6 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC EFFICIENCY (Typ.) 76% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 7A/115AVC 20A/115VAC 127 ~ 370VDC 0.98/100VAC at full load 82% 82% 82% 84% 84% <1mA / 240VAC OVER LOAD 110 ~ 125% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER TEMPERATURE REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 86% 3.5A/230VAC 40A/230VAC LEAKAGE CURRENT PROTECTION OVER VOLTAGE FUNCTION 4.75 ~ 5.5V 2.0% PSP-500-48 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover RTH2 95 Detect on heatsink of Q1,Q7 power transistor & L3 output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <4 ~ 10mA -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH with 30CFM forced air non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 VIBRATION SAFETY STANDARDS 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 130.1K hrs min. MIL-HDBK-217F (25 278*129*63.5mm (L*W*H) 2.6Kg; 6pcs/15.7Kg/0.89CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. In parallel connection, maybe only one unit operated, if the total output load less than 5% of rated load condition. 6. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:PSP-500-SPEC 2006-04-13 PDF
Документация на TS-1000-112A 

PSP-500.cdr

Дата модификации: 24.04.2006

Размер: 689.5 Кб

5 стр.

    Товары серии TS-1000

    Наименование i Упаковка U вх U вых T раб
    TS-1000-112A (MW)
     
    		— — —
    TS-1000-112F (MW)
     
    		—
    TS-1000-124A (MW)
     
    		—
    TS-1000-124F (MW)
     
    		—
    TS-1000-148A (MW)
     
    		—
    TS-1000-148F (MW)
     
    		—
    TS-1000-212B (MW)
     
    		DC-AC инвертор - P вых: 1 кВт; U вх: 12 В; U вых: 230 В; Форма: чистый синус; 345x184x7... 1 шт
    TS-1000-224B (MW)
     
    		DC-AC инвертор - P вых: 1 кВт; U вх: 24 В; U вых: 230 В; Форма: чистый синус; 345x184x7... в коробках 2 шт
    TS-1000-248B (MW)
     
    		DC-AC инвертор - P вых: 1 кВт; U вх: 48 В; U вых: 230 В; Форма: чистый синус; 345x184x7... 1 шт

    TS-1000 публикации

    17 декабря 2024
    статья

    Силовые полупроводниковые компоненты SUNCO для индустриальных источников питания

    Компоненты SUNCO идеально подходят для создания мощных индустриальных источников питания, в том числе – работающих в сложных температурных условиях. Компания предлагает двунаправленные супрессоры для входных цепей, диоды для выпрямительных мостов,... ...читать

    22 июля 2024
    статья

    Инструкция по работе с программаторами NFC и DALI/DMX для светодиодных драйверов MOSO

    Компания Компэл предлагает складские и заказные поставки качественных светодиодных драйверов для индустриального, бытового, торгового, офисного и сценического освещения производства компании MOSO. В качестве дополнения к статьям об этих драйверах... ...читать

    03 мая 2023
    новость

    Компоненты JSCJ для устройств быстрой зарядки – простая схемотехника и соответствие стандартам по ЭМС

    Соответствуя требованиям стремительно развивающегося рынка зарядных устройств и постоянно совершенствую свои технологии, компания Jiangsu Changjing Technology Co., Ltd. (JSCJ) предлагает новые решения: выпрямляющие диоды, стабилитроны,... ...читать

    06 июля 2021
    новость

    Держим старые цены на MEAN WELL весь июль!

    С 1 июля компания MEAN WELL в связи со сложной ситуацией на рынке электронных компонентов вынужденно повышает стоимость и сроки поставки продукции. Компэл для поддержки российских производителей замораживает на весь июль старые цены на широкий ряд... ...читать

    26 апреля 2021
    новость

    Экосистема MEAN WELL. Решения для любых задач электропитания (материалы вебинара)

    Программа показатьсвернуть Приглашаем всех желающих на вебинар, посвященный линейке поставок компании MEAN WELL и ее подходу к производству источников питания – как экосистемы продукции и услуг. Экосистема MEAN WELL позволяет подобрать... ...читать

    17 февраля 2021
    статья

    Особенности использования NB-IoT-модулей Quectel

    Святослав Зубарев (г. Смоленск) Системы NB–IoT уже сейчас получили широкое распространение по всему миру, а сама технология является одной из наиболее перспективных. Среди ведущих производителей NB–IoT–модулей одно из первых мест... ...читать