SE050M0150B5F-1012

Yageo
Конденсатор алюминиевый 50 В x 150 мкФ ±20%, Radial, -40...105 °C
развернуть ▼ свернуть ▲
Фотография серии SE-K

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Ток пульсаций низких частот
Диаметр x Высота 10×10×12 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 150uF
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEUFC1J151 (PAN)
 
— 200 шт — — — —
A+ HG050M151G13PKKKS00R (SUSCON)
 
— 200 шт — — — — — —
A+ EEUFC2A151S (PAN)
 
— 50 шт — — — —
A+ EEUFM1H151 (PAN)
 
— 200 шт — — — —
A+ EEUFR1H151 (PAN)
 
— 200 шт — — — —
A+ EEUFR1J151 (PAN)
 
— 200 шт — — — —
A+ EEUFC1H151 (PAN)
 
— 200 шт — — — —
A+ EEUFC1H151B (PAN)
 
— 500 шт — — — —
A+ EEUFS1H151L (PAN)
 
— 200 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFS1H151LB (PAN)
 
— 1000 шт — — — THT Lytic, Higher Capacitance, Smaller size
A+ EEUFS1K151 (PAN)
 
— 200 шт — — — — Low ESR, Miniaturized (1 size smaller than series FR)
A+ EEUFS2A151B (PAN)
 
— 500 шт — — — — Low ESR, Miniaturized (1 size smaller than series FR)
A+ EEUFR1H151B (PAN)
 
— в ленте 500 шт — — — —
A+ EEUFS1K151B (PAN)
 
— 500 шт — — — — Low ESR, Miniaturized (1 size smaller than series FR)
A+ EEUFS2A151L (PAN)
 
— 200 шт — — — — Low ESR, Miniaturized (1 size smaller than series FR)
A+ EEUFS2A151LB (PAN)
 
— 500 шт — — — — Low ESR, Miniaturized (1 size smaller than series FR)
A+ EEUFR1J151B (PAN)
 
— 500 шт — — — —
A+ EEUFR1J151L (PAN)
 
— 200 шт — — — —
A+ EEUFR1J151LB (PAN)
 
— 1000 шт — — — —
A+ EEUFM1H151B (PAN)
 
— 500 шт — — — —
A+ EEHAZS1H151B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 50V, 20% +Tol, 20% -Tol, 150uF, Through Hole Mount
A+ EEHAZS1J151B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 63V, 20% +Tol, 20% -Tol, 150uF, Through Hole Mount
A+ EEUFC2A151 (PAN)
 
— 100 шт — — — —
A+ EEUFS2A151 (PAN)
 
— 200 шт — — — — Low ESR, Miniaturized (1 size smaller than series FR)
A+ EEUFC2A151B (PAN)
 
— 500 шт — — — —

Файлы 2

показать свернуть
Yageo corporation ELECTROLYTIC CAPACITORS Miniature Aluminum Electrolytic Capacitors SE-K [ For General ] 105°C Single-Ended Lead Aluminum Electrolytic Capacitors Rated Voltage up to 450V electrical characteristics Operating Temperature Range : -40 ~ +105°C / -40 ~ +105°C / 25 ~ +105°C Rated Voltage Range : 6.3 ~ 100V / 160 ~ 250V / 350 ~ 450V Rated Capacitance Range : 0.47 ~ 15000μF / 0.47 ~ 470μF / 0.47 ~ 150μF Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C description Leakage Current (µA) : I = 0.01CV (μA) + 3μA / 0.03CV (μA) + 10μA whichever is greater. (After Rated Voltage Applied for 2 Minutes) Lower-cost capacitors suitable for high density printed circuit boards. Dissipation Factor W V (V) : 6.3 D.F. (%) : 26 Very high volumetric efficiency Ideally suited for general purpose applications, coupling, decoupling, bypass, and filtering circuit in entertainment electronics. Featuring high CV products with moderate cost MULTIPLIER FOR RIPPLE CURRENT Frequency Coefficient FREQUENCY (Hz) 120 300 1K 10K~100K 6.3~100V Below~68µF 1.00 1.20 1.30 1.45 6.3~100V 100~680µF 1.00 1.10 1.15 1.25 10 22 16 18 25 16 35 14 50 12 63~100 10 160 ~ 250 15 350 ~ 450 20 Endurance : After the rated voltage has been applied at 105°C for 1000 hours. The capacitors shall meet the following requirements. (a) Capacitance Change : Within 20% of Initial Value (b) Dissipation Factor : 200% or Less of Initial Specified Value (c) Leakage Current : Initial Specified Value or Less Shelf Life : After leaving capacitors under no load at 105°C for 500 hours, the capacitors shall meet the same requirements as Endurance. 6.3~110V 1000~22000µF 1.00 1.05 1.10 1.15 160~450V ALL Cap(µF) 1.00 1.05 1.10 1.50 diagram of dimensions Dimensions: mm Rubber Stand-off Rubber End Seal Vinyl Sleeve (P.V.C) Rubber End Seal Vinyl Sleeve (P.V.C) Dø F dø 5.0 2.0 0.5 6.3 2.5 F±0.5 F±0.5 8.0 3.5 10.0 5.0 0.6 12.0 L 15Min. 5Min. D±0.5 L L ≤ 16 L + 1.5Max. l > 16 L + 2Max. Dø = 8 & 10 L + 2.5Max. 0.4Max. 15Min. 5Min. D±0.5 Dø < 20 Dø + 0.5 Dø ≥ 20 Dø + 1 13.0 16.0 7.5 0.8 10.0 0.8 (1.0) 18.0 22.0 PDF
Документация на серию SE-K 

Дата модификации: 22.12.2010

Размер: 203 Кб

5 стр.

Yageo corporation ELECTROLYTIC CAPACITORS Miniature Aluminum Electrolytic Capacitors SE-K [ For General ] 105°C Single-Ended Lead Aluminum Electrolytic Capacitors Rated Voltage up to 450V electrical characteristics Operating Temperature Range : -40 ~ +105°C / -40 ~ +105°C / 25 ~ +105°C Rated Voltage Range : 6.3 ~ 100V / 160 ~ 250V / 350 ~ 450V Rated Capacitance Range : 0.47 ~ 15000μF / 0.47 ~ 470μF / 0.47 ~ 150μF Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C description Leakage Current (µA) : I = 0.01CV (μA) + 3μA / 0.03CV (μA) + 10μA whichever is greater. (After Rated Voltage Applied for 2 Minutes) Lower-cost capacitors suitable for high density printed circuit boards. Dissipation Factor W V (V) : 6.3 D.F. (%) : 26 Very high volumetric efficiency Ideally suited for general purpose applications, coupling, decoupling, bypass, and filtering circuit in entertainment electronics. Featuring high CV products with moderate cost MULTIPLIER FOR RIPPLE CURRENT Frequency Coefficient FREQUENCY (Hz) 120 300 1K 10K~100K 6.3~100V Below~68µF 1.00 1.20 1.30 1.45 6.3~100V 100~680µF 1.00 1.10 1.15 1.25 10 22 16 18 25 16 35 14 50 12 63~100 10 160 ~ 250 15 350 ~ 450 20 Endurance : After the rated voltage has been applied at 105°C for 1000 hours. The capacitors shall meet the following requirements. (a) Capacitance Change : Within 20% of Initial Value (b) Dissipation Factor : 200% or Less of Initial Specified Value (c) Leakage Current : Initial Specified Value or Less Shelf Life : After leaving capacitors under no load at 105°C for 500 hours, the capacitors shall meet the same requirements as Endurance. 6.3~110V 1000~22000µF 1.00 1.05 1.10 1.15 160~450V ALL Cap(µF) 1.00 1.05 1.10 1.50 diagram of dimensions Dimensions: mm Rubber Stand-off Rubber End Seal Vinyl Sleeve (P.V.C) Rubber End Seal Vinyl Sleeve (P.V.C) Dø F dø 5.0 2.0 0.5 6.3 2.5 F±0.5 F±0.5 8.0 3.5 10.0 5.0 0.6 12.0 L 15Min. 5Min. D±0.5 L L ≤ 16 L + 1.5Max. l > 16 L + 2Max. Dø = 8 & 10 L + 2.5Max. 0.4Max. 15Min. 5Min. D±0.5 Dø < 20 Dø + 0.5 Dø ≥ 20 Dø + 1 13.0 16.0 7.5 0.8 10.0 0.8 (1.0) 18.0 22.0 PDF
Документация на серию SE 

Дата модификации: 22.12.2010

Размер: 203 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)