CD080M220F10PKKKV00R

Конденсатор алюминиевый 80 В x 22 мкФ ±20%, SMD, -55...105 °C, 3000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 8×8×10 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ JCK2A220M080105 (JB)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ CGS100M220F10PKKKV00R (SUSCON)
 
в ленте 500 шт
A+ EEEFK1K220P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEEFK2A220P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEEHA2A220P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 4141
A+ EEHZA1K220P (PAN)
 
в ленте 500 шт
A+ CDL100M220F10PKKKV00R (SUSCON)
 
A+ EEH-ZA1K220P (PAN)
 
 
A+ EEH-ZA1K220V (PAN)
 
 
A+ EEEHD2A220P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 4141
A+ EEEHA2A220UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEH-ZC1K220V (PAN)
 
 
A+ EEHZA1K220V (PAN)
 
500 шт
A+ 100SXV22M (PAN)
 
в ленте 400 шт Super high voltage / 1000h at 125°C
A+ EEETG1K220P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 4141
A+ EEETG1K220UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEEFK1K220L (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEEFK1K220V (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEHZC1K220P (PAN)
 
500 шт
A+ EEHZC1K220V (PAN)
 
500 шт
A+ EEETG2A220P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 4141
A+ EEETG2A220UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEEFN1K220L (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 22uF, Surface Mount, 3333
A+ EEEFN1K220P (PAN)
 
500 шт V-FN, 80V, 22uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm
A+ EEEFN1K220V (PAN)
 
500 шт V-FN, Vibration proof, 80V, 22uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm

Файлы 1

показать свернуть
Aluminum Electrolytic Capacitors CD series ‧Low impedance, 105℃ V-chip. ‧Applicable to SMT process. ‧RoHS Compliance. ‧105℃低阻抗、V-Chip型產品。 ‧適用於SMT製程。 SPECIFICATIONS Items 項 目 Characteristics 特 性 Capacitance Tolerance 靜電容量誤差 ± 20%(120Hz﹐20℃) -55 ~ +105℃ Rated Voltage Range 額定電壓範圍 6.3 ~ 100VDC Capacitance Range 靜電容量範圍 Leakage Current 洩漏電流 Dissipation Factor 散逸因素( tan δ) Low Temperature Stability 低溫特性 Impedance Ratio(Max) 阻抗比率(最大值) CD Operating Temperature Range 適用溫度範圍 1 ~ 1500μF I ≦ 0.01CV or 3(µA),which is greater. ( After 2 minutes application of DC rated voltage, at 20℃) Measurement Frequency: 120Hz. Temperature: 20℃ Rated Voltage(V) 6.3 10 16 25 35 50 63 80 100 tan δ(Max) 0.30 0.26 0.22 0.16 0.13 0.10 0.08 0.08 0.07 Measurement Frequency: 120Hz. Rated Voltage(V) 6.3 10 16 25 35 50 63 80 100 Z(-25℃) ∕ Z(20℃) 4 3 2 2 2 2 2 2 2 Z(-55℃) ∕ Z(20℃) 8 5 4 3 3 3 3 3 3 3000hours,with application of rated voltage at 105℃(ØD=4~6.3mm : 2000hrs) Load Life 負荷壽命 Shelf Life 放置壽命 Capacitance Change Within ± 30% of Initial Value tan δ 300% or less of Initial Specified Value Leakage Current Initial Specified Value or less The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4. Capacitance Change Within ± 30% of Initial Value tan δ 300% or less of Initial Specified Value Leakage Current Initial Specified Value or less Capacitance Change tan δ Resistance to Soldering Heat 焊錫耐熱性 The capacitors shall be kept on the hot plate maintained at 250℃ for 30 seconds. After removing from the hot plate and restored at room temperature they meet the characteristics requirements listed at right. Marking 標識 Black print on the case top Leakage Current Within ± 10% of Initial Value Initial Specified Value Initial Specified Value or less Frequency Coefficient of Permissible Ripple Current Frequency (Hz) 120 ≦ F < 1K 1K ≦ F < 10K 10K ≦ F < 100K 100K ≦ F ≦ 33 0.35 0.70 0.90 1.00 33 ~ 150 0.40 0.85 0.92 1.00 > 150 0.60 0.85 0.95 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use , the rms ripple current has to be reduced. 73 PDF
Документация на серию CD 

Дата модификации: 20.09.2022

Размер: 644.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.