EEUTA1J221

Конденсатор алюминиевый 63 В x 220 мкФ ±20%, Radial, -40...125 °C, 2000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Ток пульсаций низких частот
Диаметр x Высота 16×16×20 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 23

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ JRC1J221M05001000210000B (JB)
 
250 шт
A+ JRB2A221M05001300250000B (JB)
 
1 шт
A+ SK063M221G16PKKKS00R (SUSCON)
 
200 шт
A+ SK100M221X25TKKKS00R (SUSCON)
 
150 шт
A+ UK063M221G20PKKKS00R (SUSCON)
 
200 шт
A+ ECA1JHG221 (PAN)
 
200 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount
A+ ECA2AHG221 (PAN)
 
100 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 220uF, Through Hole Mount
A+ ECA2AM221 (PAN)
 
100 шт
A+ EEUFR1J221L (PAN)
 
200 шт
A+ EEUFS2A221 (PAN)
 
200 шт Low ESR, Miniaturized (1 size smaller than series FR)
A+ JRB1J221M05001000170000B (JB)
 
500 шт конденсатор алюминиевый Radial 220 мкФ 63 В  -40...105 °C 2000 ч
A+ JRB1J221M05001000160000B (JB)
 
A+ JRC2A221M07501600260000B (JB)
 
1 шт
A+ JRB2A221M05001300210000B (JB)
 
A+ JRB2A221M05001300210000BST (JB)
 
A+ JRB2A221M0500130026 (JB)
 
A+ JRB2A221M05001300260000BST (JB)
 
A+ SL063M221G16PKKKS00R (SUSCON)
 
A+ EEUFC2A221 (PAN)
 
50 шт
A+ EEUFC2A221B (PAN)
 
250 шт
A+ EEUFC2A221L (PAN)
 
100 шт
A+ ECA1JHG221B (PAN)
 
500 шт 105°C / Standard / 6.3V to 450V
A+ ECA1JM221 (PAN)
 
200 шт

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type TA-A series Features ● ● ● ● Endurance : 125 ℃ 2000 h Heat cycle: 1000 cycle –40 ℃ to +125 ℃ AEC-Q200 compliant RoHS compliant Specifications Category temp. range –40 ℃ to +125 ℃ Rated voltage range 10 V to 63 V Capacitance range 2.2 μF to 4700 μF Capacitance tolerance ±20 % (120 Hz / +20℃) Leakage current I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Rated voltage(V) Dissipation factor(tan δ) Dissipation factor(tan δ) 10 16 25 35 50 63 0.20 0.16 0.14 0.12 0.10 0.09 (120 Hz /+20℃) For capacitance value ≧ 1000 μF , add 0.02 per every 1000 μF. After following life test with DC voltage and +125 ℃±2 ℃ ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) for 2000 h, when the capacitors are restored to 20 ℃, the capacitors shall meet the limits specified bellow. Endurance Capacitance change Dissipation factor(tan δ) DC leakage current Within ±30 % of the initial value ≦ 300 % of the initial limit Within the initial limit After storage for 1000 h at +125 ℃±2 ℃ with no voltage applied and then being Shelf life stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.(Hz) Cap.(μF) 60 120 1k 10 k 100 k 2.2 to 330 0.55 0.65 0.85 0.90 1.00 470 to 1000 0.70 0.75 0.90 0.95 1.00 2200 to 4700 0.75 0.80 0.90 0.95 1.00 Dimensions 14min. L* ø10 ≦ F±0.5 Pressure relief ø8 ød±0.05 Sleeve 3min. øD±0.5 * L ≦ 16:L±1.0(ø16x15, ø18x15 : L±1.5) øD±0.5 L ≧ 20:L±2.0 Unit:mm øD 8.0 10.0 12.5 16.0 18.0 ød 0.6 0.6 0.6 0.8 0.8 F 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 PDF
Документация на EEUTA1A102B 

Series catalog

Дата модификации: 24.09.2021

Размер: 531.5 Кб

10 стр.

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : TA Type : A Features ● Endurance: 125 °C 2000 h cycle: 1000 cycle –40 °C to +125 °C ● RoHS compliant ● Heat Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current –40 °C to + 125 °C 10 V .DC to 63 V .DC 2.2 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) V.DC 10 16 25 35 50 63 (120Hz / +20 °C) tan d 0.20 0.16 0.14 0.12 0.10 0.09 For capacitance value > 1000 µF , add 0.02 per every 1000 µF. After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours, when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specified below. Capacitance change Within ±30 % of the initial value tan d < 300 % of the initial limit DC leakage current Within the initial limit Dissipation factor (tan d) Endurance Shelf life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Rated voltage (V.DC) Frequency (Hz) Capacitance (µF) 2.2 to 10 to 63 60 120 1k 10 k 100 k 330 0.55 0.65 0.85 0.90 1.00 470 to 1000 0.70 0.75 0.90 0.95 1.00 2200 to 4700 0.75 0.80 0.90 0.95 1.00 Sleeve fd±0.05 Dimensions 010 < 08 + Pressure relief L✽ 14 min. 3 min. 0D±0.5 F±0.5 – 0D±0.5 ✽ L < 16 : L±1.0 (016×15, 018×15 : L±1.5) L > 20 : L±2.0 (Unit : mm) 0D 8 10 12.5 16 18 0d 0.6 0.6 0.6 0.8 0.8 F 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Oct. 2016 PDF
Документация на серию TA_THT 

N_AEC_A-TA_E.indd

Дата модификации: 27.03.2019

Размер: 92.5 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.