EEUFM1V102

Конденсатор алюминиевый 35 В x 1000 мкФ ±20%, Radial, -40...105 °C, 7000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Ток пульсаций низких частот
Диаметр x Высота 12.5×12.5×25 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 26

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= HF035M102I25TKKKS00R (SUSCON)
 
150 шт
P- EEUFM1V102B (PAN)
 
500 шт
P- EEUEB1V102 (PAN)
 
100 шт 105°C / ballast / high ripple, long life
A+ SK050M102I25TKKKS00R (SUSCON)
 
150 шт
A+ JRB1H102M05001300250000B (JB)
 

ECAP 1000/50V 1326 105C (JB)
1 шт конденсатор алюминиевый Radial 1000 мкФ 50 В  -40...105 °C 2000 ч Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ JRB1V102M05001000200000B (JB)
 
250 шт
A+ JRB1V102M05001300200000B (JB)
 
250 шт конденсатор алюминиевый Radial 1000 мкФ 35 В  -40...105 °C 2000 ч
A+ JRB1V102M05001300200000BST (JB)
 
250 шт
A+ HX050M102J25TKKKS00R (SUSCON)
 
390 шт
A+ SD050M102J26TKKKS00R (SUSCON)
 
390 шт
A+ SE063M102J32TKKKS00R (SUSCON)
 
1560 шт
A+ SK035M102G20TKKKS00R (SUSCON)
 
200 шт
A+ SK035M102I21TKKKS00R (SUSCON)
 
150 шт
A+ EEUFC1H102 (PAN)
 
50 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ SK063M102J25PKKKS00R (SUSCON)
 
390 шт
A+ JRB1H102M05001300210000B (JB)
 
1 шт
A+ EEUFC1J102U (PAN)
 
50 шт
A+ EEUFC1V102 (PAN)
 
100 шт
A+ ECA1HHG102 (PAN)
 
100 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ ECA1HM102 (PAN)
 
100 шт
A+ ECA1JHG102 (PAN)
 
50 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ ECA1JM102 (PAN)
 
50 шт
A+ ECA1VHG102 (PAN)
 
100 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount
A+ EEUFR1H102 (PAN)
 
100 шт
A+ EEUFR1H102B (PAN)
 
в ленте 250 шт
A+ EEUFR1V102 (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FM Type : A Features ● Low impedance (40 % to 70 % less than ● Endurance : 105 °C 2000 h to 7000 h ● RoHS compliant FC Series) Attention ● Not applicable for automotive Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life –40 °C to +105 °C 6.3 V.DC to 50 V.DC 22 µF to 6800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes V.DC 6.3 10 16 25 35 50 (max.) (120 Hz/+20 °C) tan d 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 µF for products of 1000 µF or more. After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours 08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20 : 5000 hours 012.5×25 to 012.5×35/ 016×25 : 7000 hours Capacitance change Within ±25 % of the initial value (6.3 V.DC to 10 V.DC : ±30 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current Rated voltage (V.DC) 6.3 to 50 Capacitance (µF) 22 47 390 1200 to to to to 60 0.45 0.60 0.65 0.75 33 330 1000 6800 Frequency (Hz) 1k 0.75 0.85 0.90 0.95 120 0.55 0.70 0.75 0.80 10 k 0.90 0.95 0.98 1.00 100 k 1.00 1.00 1.00 1.00 fd±0.05 Dimensions Sleeve Pressure relief 06.3 < < 08 010 < + L✽ ✽ 0D L 0d F 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 L < 16 : L±1.5 L > 20 : L±2.0 5 — 0.5 2.0 (Unit : mm) 6.3 — 0.5 2.5 8 — 0.6 3.5 10 — 0.6 5.0 12.5 12.5 to 25 30 to 40 0.6 0.8 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 16 — 0.8 7.5 Mar. 2016 PDF
Документация на серию FM_THT 

N_AEC_A-FM_E.indd

Дата модификации: 27.03.2019

Размер: 100.5 Кб

5 стр.

Aluminum Electrolytic Capacitors/ FM Radial Lead Type Series: FM Type :A Country of Origin Japan Malaysia China n Features Low impedance (40 to 70% less than FC Series) Endurance : 2000 to 7000 hours at +105°C RoHS directive compliant n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current -40 to + 105°C 6.3 to 50 V .DC 22 to 6800 µ F ±20 % (120Hz/+20°C) I < 0.01 CV (µA) after 2 minutes application of rated working voltage at +20°C W.V. 6.3 10 16 25 35 50 (max.) (120Hz/+20C°) tan δ 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000µF for products of 1000µF or more. tan δ After following life test with DC voltage and +105±2°C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall meet the limits specified below. Duration φ5 to φ6.3: 2000 hours, φ8×11.5 to φ8×15: 3000 hours φ8×20 to φ10×16: 4000 hours, φ10×20 to φ12.5×20/ φ16×20: 5000 hours φ12.5×25 to φ12.5×35/ φ16×25: 7000 hours Endurance ±25% of initial measured value (6.3V to10V:±30%) < 200 % of initial specified value < initial specified value Capacitance change tan δ DC leakage current After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitor shall meet the limits specified in Endurance.(With voltage treatment) Shelf Life n Frequency correction factor for ripple current 6.3 to 50 Frequency(Hz) 120 1k 10k 0.90 0.55 0.75 0.95 0.70 0.85 0.98 0.75 0.90 1.00 0.80 0.95 Capacitance W.V.(V.DC) (µF) 22 47 390 1200 60 0.45 0.60 0.65 0.75 to 33 to 330 to 1000 to 6800 100k 1.00 1.00 1.00 1.00 n Dimensions in mm (not to scale) φ8> φ10< φd±0.05 P± 0.5 Vent P± 0.5 Sleeve L L <16:L+1.5max L >20:L+2.0 max 14 min Body Dia. φD 3min φD+0.5 max (mm) 5 6.3 8 10 Body Length L Lead Dia. φd Lead space P φD+0.5 max 12.5 16 12.5 to 25 30 to 35 0.5 0.5 0.6 0.6 0.6 0.8 0.8 2 2.5 3.5 5.0 5.0 5.0 7.5 Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006  EE79  PDF
Документация на EEUFM1V102 

Дата модификации: 02.03.2006

Размер: 67.1 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.