EEUEE2D680B

Конденсатор алюминиевый 200 В x 68 мкФ ±20%, Radial, -25...105 °C, 10000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Ток пульсаций низких частот
Диаметр x Высота 12.5×12.5×25 мм
Примечание 105°C / ballast / high ripple, long life
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= EEUEE2D680 (PAN)
 
100 шт 105°C / ballast / high ripple, long life
P- EEUED2D680 (PAN)
 
100 шт 105°C / ballast / high ripple, long life
P- EEUED2D680B (PAN)
 
500 шт 105°C / ballast / high ripple, long life
P- EEUEB2D680 (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount
A+ SE400M680K25TKKKS00R (SUSCON)
 
A+ EEUEE2E680S (PAN)
 
100 шт 105°C / ballast / high ripple, long life
A+ EEUEE2G680 (PAN)
 
50 шт 105°C / ballast / high ripple, long life
A+ JRB2G680M07501600250000B (JB)
 
75 шт
A+ JRB2G680M07501600250000BST (JB)
 
75 шт
A+ SH400M0068B7F-1836 (YAG)
 
100 шт
 
A+ EKM686M2GL25RR (MAN YUE)
 
 
A+ SK250M680J26TKKKS00R (SUSCON)
 
A+ HE400M680K25TKKKS00R (SUSCON)
 
A+ EEUEB2V680 (PAN)
 
50 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 350V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount
A+ EEUED2V680 (PAN)
 
50 шт 105°C / ballast / high ripple, long life
A+ EEUED2V680S (PAN)
 
50 шт 105°C / ballast / high ripple, long life
A+ JRB2G680M07501800250000B (JB)
 
100 шт
A+ EEUEE2V680 (PAN)
 
50 шт 105°C / ballast / high ripple, long life
A+ EEUEE2D680S (PAN)
 
100 шт 105°C / ballast / high ripple, long life
A+ EEUED2D680S (PAN)
 
100 шт 105°C / ballast / high ripple, long life
A+ EEUEB2V680S (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 350V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount
A+ EEUEB2E680S (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 250V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount
A+ EEUEB2E680 (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 250V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount
A+ EEUEB2D680S (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 200V, 20% +Tol, 20% -Tol, 68uF, Through Hole Mount
A+ EEUED2D680SB (PAN)
 
250 шт 105°C / ballast / high ripple, long life

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors This Series is no longer available for purchase in the country of Japan. Radial Lead Type EE-A series Features ● Endurance : 105 ℃ 8000 h to 10000 h ● High ripple current (at high frequency) : 40 % higher than ED series ● RoHS compliant Specifications Category temp. range –25 ℃ to +105 ℃ Rated voltage range 160 V to 450 V Capacitance range 10 μF to 330 μF Capacitance tolerance ±20 % (120 Hz / +20℃) Leakage current Dissipation factor(tan δ) I ≦ 0.06 CV +10 (μA) After 2 minutes Rated voltage(V) 160 200 250 350 400 450 Dissipation factor(tan δ) 0.15 0.15 0.15 0.20 0.24 0.24 (120 Hz /+20℃) After following life test with DC voltage and +105 ℃±2 ℃ ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 ℃, the capacitors shall meet the limits specified bellow. Endurance ø10:8000 h ø12.5 to ø18:10000 h Capacitance change Dissipation factor(tan δ) DC leakage current Within ±20 % of the initial value ≦ 200 % of the initial limit Within the initial limit After storage for 1000 h at +105 ℃±2 ℃ with no voltage applied and then being Shelf life stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.(Hz) Capacitance(μF) 10 to 82 100 to 330 60 120 300 1k 10 k 100 k 0.25 0.30 0.35 0.40 0.50 0.55 0.65 0.70 0.90 0.90 1.00 1.00 Sleeve Pressure relief L±2.0 14min. F±0.5 ød±0.05 Dimensions 3min. øD±0.5 øD ød F 10.0 0.6 5.0 12.5 0.6 5.0 16.0 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 18.0 0.8 7.5 Unit:mm 28-Feb-20 PDF
Документация на EEUEE2C101B 

Series catalog

Дата модификации: 24.09.2021

Размер: 550.9 Кб

11 стр.

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : EE Type : A Features ● High ripple current (at high frequency) : 40 % higher than ED Series : 105 °C 8000 h to 10000 h ● RoHS compliant ● Endurance Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life –25 °C to + 105 °C 160 V .DC to 450 V .DC 10 µF to 330 µF ±20 % (120 Hz/+20 °C) I < 0.06 CV +10 (µA) After 2 minutes V.DC 160 200 250 350 400 450 (120 Hz/+20 °C) tan d 0.15 0.15 0.15 0.20 0.24 0.24 After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 010 : 8000 hours 012.5 to 018 : 10000 hours Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current Rated voltage (V.DC) 160 to 450 Frequency (Hz) Capacitance (µF) 60 < 120 < 300 < 1k< 10 k < 100 k < 10 to 82 0.25 0.35 0.50 0.65 0.90 1.00 100 to 330 0.30 0.40 0.55 0.70 0.90 1.00 Sleeve Pressure relief fd±0.05 Dimensions + L±2.0 14 min. 3 min. 0D±0.5 F±0.5 – (Unit : mm) 0D 10 12.5 16 18 0d 0.6 0.6 0.8 0.8 F 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 PDF
Документация на серию EE_THT 

N_AEC_A-EE_E.indd

Дата модификации: 27.03.2019

Размер: 99.5 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.