EEHZK1V181P

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 35 В x 180 мкФ ±20%, SMD, -55...125 °C, 4000 ч
развернуть ▼ свернуть ▲
Внешний вид серии ZK_HYBRID

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 10

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ 35SVPK180M (PAN)
 
— в ленте 400 шт — — — — Miniaturised High Voltage, Temp and Capacitance
A+ EEEFK1H181SP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 180uF, Surface Mount, 2626
A+ EEEFK1H181SV (PAN)
 
— 500 шт
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 180uF, Surface Mount, 3333
A+ EEEFN1H181UP (PAN)
 
— в ленте 500 шт — — — — V-FN, 50V, 180uF, 105°C, 2000h, 8x10.2mm, ripple 350mArms, 0.34Ohm
A+ EEEFN1H181UV (PAN)
 
— 500 шт — — — — V-FN, Vibration proof, 50V, 180uF, 105°C, 2000h, 8x10.2mm, ripple 350mArms, 0.34Ohm
A+ EEH-ZK1V181P (PAN)
 
—
 
 — — — —
A+ EEH-ZS1H181UP (PAN)
 
—
 
 — — — —
A+ EEH-ZS1H181UV (PAN)
 
—
 
 — — — —
A+ EEH-ZS1J181UV (PAN)
 
—
 
 — — — —
A+ EEHZK1V181V (PAN)
 
— 500 шт — — — — Hybrid/ Expanded RC & Cap; anti vibration

Файлы 3

показать свернуть
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type ZK series Hybrid High temperature lead-free reflow Features ● ● ● ● High capacitance and High ripple current compared with ZC series Endurance : 4000 h at 125 °C (High temperature / Long life) Low ESR (85 % over, Lower ESR than Current V-TP), Low LC (0.01 CV or 3 μA) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. New lineup of ø6.3 product.（ø6.3, ø8, ø10） ● AEC-Q200 compliant ● RoHS compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan δ) Surge voltage (V) Endurance Shelf life Damp heat (Load) Resistance to soldering heat C D8 F G –55 ℃ to +125 ℃ 25 V to 35 V 33 μF to 47 μF 56 μF to 82 μF 100 μF to 150 μF 180 μF to 270 μF 330 μF to 470 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Please see the attached characteristics list Rated voltage × 1.25 (15 ℃ to 35 ℃) +125 ℃ ± 2 ℃, 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit Size code ESR after endurance C D D8 F G (Ω / 100 kHz)(-40 ℃） 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +125 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 ℃ ± 2 ℃, 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10% of the initial value Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Dimensions (not to scale) K (I) 2.2 0.65±0.1 1.5 0.35 5.8±0.3 6.6 7.8 2.6 0.65±0.1 1.8 0.35 7.7±0.3 6.6 7.8 2.6 0.65±0.1 1.8 0.35 10.2±0.3 8.3 10 3.4 0.90±0.2 3.1 0.70±0.2 12.0 3.5 0.90±0.2 4.6 0.70±0.2 A±0.2 F Lot number R. voltage code E V Supportive terminals Unit：V 25 35 Size code D D8 F G T W L øD 6.3 L 6.1±0.3 L F W Pressure relief (ø10 ≦) ( ) Reference size H A, B max. 6.6 R R (P) K 10.0 10.2±0.3 10.3 (I) Rated voltage code +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 6.5 (I) 8.0 K 5.3 < Size code：F, G > A±0.2 (S) B±0.2 H øD±0.5 F 6.3 P (S) < Size code：D, D8 > K 47 E ZK 6.3 W (P) [Vibration-proof product] 5.8±0.3 Unit：ｍｍ I I W P 7.8 0 to +0.15 2.4 0.65±0.1 2.2 0.35 0.35 Supportive terminals K +0.15 -0.20 +0.15 -0.20 R T (I) ( ) Reference size 5.0 H A, B max. H Pressure relief (ø10 ≦) L B±0.2 Series identification W øD (I) L Capacitance (μF) C D D8 F G (P) H Size code B±0.2 øD±0.5 Negative polarity marking (–) A±0.2 0.3 max. øD±0.5 [Standard] Example : 25 V 47 μF Marking color : BLACK (I) Marking D ( ) Reference size Unit：ｍｍ S T 1.1±0.2 3.3 1.05±0.2 6.3 8.0±0.3 6.6 7.8 0 to +0.15 2.4 0.65±0.1 2.2 1.1±0.2 3.3 1.05±0.2 8.0 10.5±0.3 8.3 10.0 0 to +0.15 3.4 1.2±0.2 3.1 0.70±0.2 0.70±0.2 5.3 1.3±0.2 12.0 0 to +0.15 3.5 1.2±0.2 4.6 0.70±0.2 0.70±0.2 6.9 1.3±0.2 10.0 10.5±0.3 10.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Dec-19 PDF
Документация на EEHZK1E151XV 

Series catalog

Дата модификации: 22.09.2021

Размер: 522.9 Кб

9 стр.

2019 Products Catalog Hybrid Conductive Polymer Hybrid Aluminum Electrolytic Capacitors PDF
Документация на семейство Hybrid Cap 

Products catalog

Дата модификации: 27.02.2019

Размер: 1.16 Мб

25 стр.

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZK Type: V High temperature lead-free reflow Features ● ● ● ● High capacitance and High ripple current compared with ZC series Endurance : 4000 h at 125 °C (High temperature / Long life) Low ESR (85 % over, Lower ESR than Current V-TP), Low LC (0.01 CV or 3 μA) Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. New lineup of φ6.3 product.（φ6.3、φ8、φ10） ● AEC-Q200 compliant ● RoHS compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current C D8 F G –55 ℃ to +125 ℃ 25 V.DC to 35 V.DC 33 μF to 47 μF 56 μF to 68 μF 100 μF to 150 μF 180 μF to 270 μF 330 μF to 470 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +125 °C ± 2 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after Endurance C D D8 F G (Ω / 100 kHz)(-40 ℃） 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) +85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit 0.3 max. 47 E ZK Series identification （P） Capacitance (μF) B±0.2 Negative polarity marking (–) A±0.2 – H φD±0.5 Example : 25 V.DC 47 μF Marking color : BLACK + L W Pressure relief (φ10 and larger) ( )Reference size Rated voltage mark Size code Lot number Rated vol. mark E V Unit：V.DC 25 35 C D D8 F G φD 5.0 6.3 6.3 8.0 10.0 L 5.8±0.3 5.8±0.3 7.7±0.3 10.2±0.3 10.2±0.3 A、B 5.3 6.6 6.6 8.3 10.3 （I） Dimensions (not to scale) （I） Marking D H 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.2 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.5 1.8 1.8 3.1 4.6 Unit：ｍｍ K 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 ·The dimensions of the vibration-proof products, please refer to the page ofthe mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07-Feb-19 PDF
Документация на серию ZK_HYBRID 

Series catalog

Дата модификации: 07.02.2019

Размер: 296.2 Кб

2 стр.

    Публикации 2

    показать свернуть
    08 сентября 2020
    статья

    Гибридные конденсаторы Panasonic: взять лучшее от электролитов и полимеров

    Вячеслав Гавриков (г. Смоленск) Гибридные конденсаторы представляют особый интерес для пользователей. Они унаследовали от полимерных конденсаторов такие достоинства как устойчивость к импульсам тока, повышенную надежность и низкое собственное... ...читать

    13 августа 2020
    новость

    Гибридные конденсаторы Panasonic доступны со склада по низким ценам

    Развивая сотрудничество между компаниями Компэл и Panasonic, мы продолжаем расширять ассортимент пассивных компонентов этого известного производителя на складе Компэл. Компания Panasonic – один из лидеров рынка полимерных конденсаторов. Их... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)