EEETK1C221UP

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 16 В x 220 мкФ ±20%, SMD, -40...125 °C, 3000 ч
развернуть ▼ свернуть ▲
Внешний вид серии TK_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 26

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEETP1C221AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
P- EEETG1C221UP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
P- EEETC1C221P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFK1C221XP (PAN)
 
— в ленте 900 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ JCK1C221M063077 (JB)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ JCK1E221M080105 (JB)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ CE016M0220REG-1010 (YAG)
 

ECAPSMD 220/16V 1010 105C CE (YAG) 		— в ленте 500 шт конденсатор алюминиевый SMD 220 мкФ 16 В -40...105 °C 2000 ч — — —
A+ CDS025M221E7DPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CK016M221E7DPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CK016M221F10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ CK016M221F6BPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — — —
A+ CK025M221F10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ EEEFK1C221AP (PAN)
 
— 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFTE221XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ EEEFK1E221P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFP1E221AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFK1C221P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ CD016M221E7DPKKKV00R (SUSCON)
 
— — — — — — —
A+ CE025M0220REF-0810 (YAG)
 
— 500 шт конденсатор алюминиевый SMD 220 мкФ 25 В -40...105 °C 2000 ч — — —
A+ EEEFPC221XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 2626
A+ EEHZA1E221P (PAN)
 
— в ленте 500 шт — — — —
A+ EEE1EA221UP (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ JCK1E221M100105 (JB)
 
— — — — — — —
A+ EEETC1E221P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEE1CA221P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ CD025M221F10PKKKV00R (SUSCON)
 
— — — — — — —

Сопутствующие товары 24

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-E016K227T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45L-E016K227TE200 (XIANGYEE)
 
TANT73434373X43X43MM в ленте 400 шт
 
 TANT73434373X43X43MM —
CA45-D016K227T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
16TQC220MD3 (PAN)
 
— в ленте 2500 шт
 
 — —
CA45L-E016M227TE200 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA55-E016K227T (XIANGYEE)
 
— — —
CA55-D016M227TE100 (XIANGYEE)
 
— — —
CA55-D016M227TE060 (XIANGYEE)
 
— — —
CA55-D016K227TE100 (XIANGYEE)
 
— — —
CA55-D016K227TE060 (XIANGYEE)
 
— — —
CA45L-V020M227TE250 (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45L-V020K227TE250 (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45L-V016M227TE200 (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45L-V016K227TE200 (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45L-E020M227TE450 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-E020K227TE450 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-V020M227T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V020K227T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V016M227T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V016K227T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-E020M227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E020K227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E016M227T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-D016M227T (XIANGYEE)
 
TANT73433173X43X31MM
 
 TANT73433173X43X31MM —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type TK series Features ● ● ● ● ● ● Endurance：125 ℃ 3000 h Low ESR at –40 ℃ (50 % lower than TG series) Added ESR specification after the endurance test Vibration-proof product (30G guaranteed) is available upon request AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life ESR after the life test –40 ℃ to +125 ℃ 10 V to 35 V 47 μF to 470 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV（μA）After 2 minutes Please see the attached characteristics list Rated voltage (V) 10 16 25 35 Z (–25 ℃) / Z (+20 ℃) 3 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 4 3 3 3 After the life test with DC rated woking voltage at +125 ℃ ± 2 ℃ for 3000 hours, the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value (code U : ±35 %) Dissipation factor（tan δ) ≦ 300 % of the initial limit (code U : ±350 %) Leakage current Within the initial limit After storage for 1000 hours at +125 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After the life test with DC rated working voltage at +125 ℃ ± 2 ℃ for 3000 hours, ESR value shall meet the specified below. 20 ℃ ≦ 150 % of the initial limit After 1000 hours –40 ℃ ≦ 200 % of the initial limit 20 ℃ ≦ 300 % of the initial limit After 2000 hours –40 ℃ ≦ 400 % of the initial limit 20 ℃ ≦ 1000 % of the initial limit After 3000 hours –40 ℃ ≦ 1500 % of the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 Dimensions Example : 10 V 220 μF Marking color : BLACK A±0.2 K 0.3 max. Mark for Lead-Free （P） L products (Black dot) W Pressure Relief (ø10 and larger) Rated voltage code （I） H Series identification 220 A TK B±0.2 Capacitance (μF) øD±0.5 Negative polarity marking (–) 100 k to 1.00 （）Reference size Lot number R.voltage code A C 10 16 （I） Marking 1k 0.85 Unit：mm Unit：V E V 25 35 Size code F G øD L 8.0 10.2±0.3 A, B H I W P K 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEETK1A221P 

Series catalog

Дата модификации: 24.09.2021

Размер: 594.3 Кб

10 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TK Type : V Features ● Endurance : 125 °C 3000 h ● Low ESR at –40 °C (50 % lower than TG series) ● Added ESR specification after the endurance test ● Vibration-proof product is available upon request. ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life ESR after the life test AEC-Q200 –40 °C to +125 °C 10 V.DC to 35 V.DC 47 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 Z(–25 °C)/Z(+20 °C) 3 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 4 3 3 3 After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value (code U : ±35 %) < 300 % of the initial limit (code U : ±350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall meet the specified below. < 150 % of the initial limit 20 °C After 1000 hours < 200 % of the initial limit –40 °C 20 °C < 300 % of the initial limit After 2000 hours < 400 % of the initial limit –40 °C 20 °C < 1000 % of the initial limit After 3000 hours < 1500 % of the initial limit –40 °C AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 100 k to 1.00 Lot number Series identification L Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) A±0.2 + (P) (I) H 0D±0.5 220 A TK Capacitance (µF) – K 0.3 max. Negative polarity marking (–) (I) Dimensions Example : 10 V.DC 220 µF Marking color : BLACK R. Voltage (V.DC) Code 10 k 0.95 B±0.2 Marking 1k 0.85 W ( ) Reference size Rated voltage code (Unit : mm) 10 16 25 35 A C E V Size L A, B H I 0D code F 8.0 10.2±0.3 8.3 10.0 max. 3.4 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 W P K 0.90±0.2 0.90±0.2 3.1 4.6 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 PDF
Документация на серию TK_SMD 

N_AEC_V-TK_E.indd

Дата модификации: 27.03.2019

Размер: 76.6 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)