EEEHP1A100R

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 10 В x 10 мкФ ±20%, SMD, -40...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии HB_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 4×4×4.3 мм
  Примечание: Aluminum Electrolytic Capacitor, Non-polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 23

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ JCK1C100M040054 (JB)
 
— в ленте 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ CH016M100C5APKKKV00R (SUSCON)
 
— — — — — — —
A+ EEEFK1C100R (PAN)
 
— в ленте 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ EEEFN1A100R (PAN)
 
— в ленте 2000 шт — — — — V-FN, 10V, 10uF, 105°C, 2000h, 4x5.8mm, ripple 90mArms, 1.35Ohm
A+ EEEFP1C100AR (PAN)
 
— 2000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ EEE1CA100SR (PAN)
 
— в ленте 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ 10SVP10M (PAN)
 
— 2000 шт — — — —
A+ 20SVP10M (PAN)
 
— в ленте 1500 шт — — — —
A+ EEEFC1C100R (PAN)
 
— в ленте 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ CD016M100C5APKKKV00R (SUSCON)
 
— — — — — — —
A+ CK016M100C5APKKKV00R (SUSCON)
 
— в ленте 2000 шт — — — — — —
A+ 10SVPS10M (PAN)
 
— 2000 шт — — — —
A+ CS016M100C5APKKKV00R (SUSCON)
 
— — — — — — —
A+ 20SVPA10M (PAN)
 
— 1500 шт — — — —
A+ EEEHP1C100R (PAN)
 
— 1000 шт — — — — — Aluminum Electrolytic Capacitor, Non-polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2121
A+ EEFCS1D100R (PAN)
 
— в ленте 3500 шт — — — —
A+ EEE1AA100NR (PAN)
 
— 2000 шт — — — — — Aluminum Electrolytic Capacitor, Non-polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ EEEFN1C100R (PAN)
 
— 2000 шт — — — — V-FN, 16V, 10uF, 105°C, 2000h, 4x5.8mm, ripple 90mArms, 1.35Ohm
A+ EEE1CA100AR (PAN)
 
— 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ EEE1CA100NR (PAN)
 
— 1000 шт — — — — — Aluminum Electrolytic Capacitor, Non-polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2121
A+ EEEHB1C100AR (PAN)
 
— 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ EEEHB1C100R (PAN)
 
— 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717
A+ EEEFK1C100AR (PAN)
 
— 2000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 1717

Сопутствующие товары 19

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-A010M106T (XIANGYEE)
 
TANT32161632X16X16MM в ленте 2000 шт
 
 TANT32161632X16X16MM —
L-KLS10-TCA-106K20V-B (KLS)
 
— 1 шт
 
 — —
L-KLS10-TCA-106K10V-B (KLS)
 
— в ленте 2000 шт
 
 — —
CA45L-B020K106TE1k2 (XIANGYEE)
 
TANT35282135X28X21MM в ленте 2000 шт
 
 TANT35282135X28X21MM —
CA45L-B016K106TE1k2 (XIANGYEE)
 
TANT35282135X28X21MM в ленте 2000 шт
 
 TANT35282135X28X21MM —
CA45L-A016K106TE1k7 (XIANGYEE)
 
TANT32161832X16X18MM в ленте 2000 шт
 
 TANT32161832X16X18MM —
CA45L-A010K106TE1k8 (XIANGYEE)
 
TANT32161832X16X18MM в ленте 2000 шт
 
 TANT32161832X16X18MM —
CA45-C020K106T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 1000 шт
 
 TANT60322860X32X28MM —
CA45-C016K106T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 500 шт
 
 TANT60322860X32X28MM —
CA45-B020K106T (XIANGYEE)
 
TANT35281935X28X19MM в ленте 2000 шт
 
 TANT35281935X28X19MM —
CA45-A010K106T (XIANGYEE)
 
TANT32161632X16X16MM в ленте 2000 шт
 
 TANT32161632X16X16MM —
CA45-A016K106T (XIANGYEE)
 
TANT32161632X16X16MM в ленте 2000 шт
 
 TANT32161632X16X16MM —
CA45-A016M106T (XIANGYEE)
 
TANT32161632X16X16MM в ленте 2000 шт
 
 TANT32161632X16X16MM —
CA45-A020K106T (XIANGYEE)
 
TANT32161632X16X16MM в ленте 2000 шт
 
 TANT32161632X16X16MM —
CA45-B010K106T (XIANGYEE)
 
TANT35281935X28X19MM в ленте 2000 шт
 
 TANT35281935X28X19MM —
CA45-B016K106T (XIANGYEE)
 
TANT35281935X28X19MM в ленте 2000 шт
 
 TANT35281935X28X19MM —
CA45-B016M106T (XIANGYEE)
 
TANT35281935X28X19MM 2000 шт
 
 TANT35281935X28X19MM —
CA45-C010K106T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 500 шт
 
 TANT60322860X32X28MM —
16TQC10M (PAN)
 
— в ленте 2000 шт — —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Long life Surface Mount Type HB series HB 5.5 mm max. Low profile HA Features ● ● ● ● ● Endurance : 105 ℃ 2000 h 5.8 mm height (≦ ø6.3), 5.5 mm height max. Vibration-proof product (30G guaranteed) is available upon request. (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) –40 ℃ to +105 ℃ 4.0 V to 50 V 1 μF to 470 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Bi-polar I ≦ 0.02 CV or 6 (μA) after 2 minutes) (Whichever is greater) Please see the attached characteristics list Rated voltage（V） 4 6.3 10 16 25 35 50 Z (-25 ℃) / Z (+20 ℃) 7 4 3 2 2 2 2 (Impedance ratio at 120 Hz) Z (-40 ℃) / Z (+20 ℃) 15 8 6 4 4 3 3 After applying rated working voltage for 2000 h (Bi-polar:1000 h for each polarity) at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Within ±20 % of the initial value Capacitance change Characteristics at low temperature Endurance (4 V : ±35 % 6.3 V : ±25 % 04 to 06.3), 5.5 mm max. : ±25 % Dissipation factor (tan δ) ≦200 % of the initial limit Leakage current Within the initial limit After storage for 1000 h at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor (tan δ) Within the initial limit Leakage current Within the initial limit Shelf life Resistance to soldering heat Frequency correction factor for ripple current Frequency（Hz） Correction factor 50, 60 0.70 Series indentification 47 g HB products (Black dot) Lot number C 4.0 6.3 10 16 Rated voltage code E V H Unit：V 25 35 50 Size code B C D E F G øD L A,B 4.0 5.8±0.3 4.3 5.0 5.8±0.3 5.3 6.3 5.8±0.3 6.6 8.0 6.2±0.3 8.3 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 ● Low profile ( L=5.5 mm max.) Size code B C D øD 4.0 5.0 6.3 5.4 5.4 5.4 L +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 A,B 4.3 5.3 6.6 H 5.5 max. 6.5 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. H 5.5 max. 6.5 max. 7.8 max. （I） （P） Pressure Relief（ø10 and larger） (BS : 5.5 mm max.) Mark for Lead-Free W L (HP : Bi-polar) （I） Capacitance (μF) B±0.2 (No marking for the bi-polar) A±0.2 H øD±0.5 0.3 max. Negative polarity marking (–) g j A 10 k to 1.70 Dimensions Example : 4.0 V 47 μF Marking color : BLACK R. voltage code 1k 1.30 K Marking 120 1.00 ( )Reference size I 1.8 2.2 2.6 3.4 3.4 3.5 I 1.8 2.2 2.6 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 W 0.65±0.1 0.65±0.1 0.65±0.1 P Unit：mm K +0.15 1.0 1.5 1.8 2.2 3.1 4.6 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 0.70±0.2 0.70±0.2 P K 1.0 0.35 1.5 0.35 1.8 0.35 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEHB0G151P 

Series catalog

Дата модификации: 24.09.2021

Размер: 634.5 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HB Type : V Long life HB 5.5 mm max. ↑ Low profile HA Features ● Endurance: 105 °C 2000 h ● 5.8 mm height (< 06.3), 5.5 mm height max. ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance –40 °C to +105 °C 4 V.DC to 50 V.DC 1 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Leakage current (Bi-polar I < 0.02 CV or 6 (µA) after 2 minutes) Dissipation factor (tan d) Please see the attached characteristics list V.DC 4 6.3 10 16 25 35 50 Characteristics Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 (Impedance ratio at 120 Hz) at low temperature Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value (4 V.DC : ±35 % 6.3 V.DC : ±25 % 04 to 06.3), 5.5 mm max. : ±25 % Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, Shelf life capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20°C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value tan d Within the initial limit soldering heat DC leakage current Within the initial limit AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 10 k to 1.70 0.3 max. Mark for Lead-Free products (Black dot) Rated Voltage code 4 6.3 10 16 25 35 50 g j A C E V H (P) (I) W Pressure Relief (010 and larger) Series identification (HP : Bi-polar) (BS : 5.5 mm max.) Lot number + L Capacitance (µF) A±0.2 B±0.2 H 0D±0.5 Negative polarity marking (–) (No marking for the bi-polar) 47 g HB – (I) Dimensions Example : 4 V.DC 47 µF Marking color : BLACK R. Voltage (V.DC) Code 1k 1.30 K Marking 120 1.00 ( ) Reference size (Unit : mm) Size L A, B code 0D B 4.0 5.8±0.3 4.3 C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 E 8.0 6.2±0.3 8.3 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H I W P K 5.5 max. 6.5 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 ● 5.5 Size code B C D P K mm height max. 0D L A, B H I W 4.0 5.0 6.3 5.4+- 0.1 0.2 5.4+- 0.1 0.2 5.4+- 0.1 0.2 4.3 5.3 6.6 5.5 max. 6.5 max. 7.8 max. 1.8 2.2 2.6 0.65±0.1 0.65±0.1 0.65±0.1 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 PDF
Документация на серию HB_SMD 

N_AEC_V-HB_E.indd

Дата модификации: 27.03.2019

Размер: 96.1 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)