EEEFC1C101V

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 16 В x 100 мкФ ±20%, SMD, -40...105 °C, 1000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FC_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 9.5 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, 3733
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ JCK1C101M063054 (JB)
 
— в ленте 1000 шт — — — — — — —
A+ JCK1E101M063077 (JB)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ CE016M0100RED-0605 (YAG)
 

ECAPSMD 100/16V 0605 105C CE (YAG) 		— в ленте 1000 шт конденсатор алюминиевый SMD 100 мкФ 16 В -40...105 °C 2000 ч — — —
A+ CDS025M101E06PKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CK025M101E7DPKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ CD016M101E5APKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ EEEFK1C101AP (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEEFK1C101P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEEFK1E101P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEEFK1E101XP (PAN)
 
— в ленте 900 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEEFN1E101UP (PAN)
 
— в ленте 1000 шт — — — — V-FN, 25V, 100uF, 105°C, 2000h, 6.3x5.8mm, ripple 240mArms, 0.36Ohm
A+ EEEFP1C101AP (PAN)
 
— в ленте 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEEFP1E101AP (PAN)
 
— в ленте 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEEFT1C101AR (PAN)
 
— в ленте 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2121
A+ EEEFT1E101AP (PAN)
 
— в ленте 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEETC1C101P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEETC1C101XP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEETP1C101AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEE1EA101UP (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 3333
A+ EEE1EA101XP (PAN)
 
— в ленте 900 шт
 
 — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2626
A+ EEETPC101XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 100uF, Surface Mount, 2525
A+ 16SVPC100M (PAN)
 
— в ленте 1000 шт — — — —
A+ 20SVP100M (PAN)
 
— в ленте 400 шт — — — —
A+ 25SVPF100M (PAN)
 
— в ленте 1000 шт — — — — High Voltage / Large capacitance
A+ EEEFH1C101XL (PAN)
 
— в ленте 900 шт
 
 — — — V-FH / 16V / 100uF / 105°C / 7000h / 6.3x7.7mm / ripple 300mArms / ESR 0.45Ohm

Сопутствующие товары 17

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-D016K107T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-D016M107T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-D020K107T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-E020K107T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45-E025K107T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45L-D016K107TE200 (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45L-D020K107TE300 (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA55-E025M107TE080 (XIANGYEE)
 
TANT73434373X43X43MM 400 шт TANT73434373X43X43MM —
CA45-C016K107T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 500 шт
 
 TANT60322860X32X28MM —
25TQC100MD3 (PAN)
 
— в ленте 2500 шт — —
20TQC100MYF (PAN)
 
— в ленте 2500 шт — —
20TQC100MD2 (PAN)
 
— в ленте 3000 шт — —
16TQC100MYF (PAN)
 
— в ленте 3000 шт — —
16TDC100MYF (PAN)
 
TANT73432073X43X20MM в ленте 3000 шт
 
 TANT73432073X43X20MM —
CA45-C016M107T (XIANGYEE)
 
TANT60322860X32X28MM 10 шт
 
 TANT60322860X32X28MM —
CA45-D020M107T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 30 шт
 
 TANT73433173X43X31MM —
CA45-E016K107T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FC Type : V Low impedance FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 22 j FC Capacitance (µF) L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + (I) Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. K Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D + 0.1 4.3 5.5 max. B 4.0 5.4 - 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 PDF
Документация на серию FC_SMD 

N_AEC_V-FC_E.indd

Дата модификации: 27.03.2019

Размер: 83.3 Кб

3 стр.

Aluminum Electrolytic Capacitors/ FC Low impedance Surface Mount Type Series: FC Type: V FC ↑ HA ■ Features ● ● ● ● ● Endurance : 105 °C 1000 h Low impedance (1/2 for HA series) Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature W.V. (V) Z(–25 °C) / Z(+20 °C) Z(–40 °C) / Z(+20 °C) –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 μF to 1500 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached standard products list 6.3 10 16 25 35 50 2 2 2 2 2 2 (Impedance ratio at 120 Hz) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Endurance Capacitance change tan d DC leakage current ±20 % of initial measured value < 200 % of initial specified value < initial specified value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k 100 k to 0.70 0.75 0.90 0.95 1.00 ■ Marking ■ Dimensions in mm (not to scale) (Unit : mm) Lot number Size code E V H 25 V 35 V 50 V (P) W Pressure Relief (010 and larger) B Rated Voltage Mark j 6.3 V A 10 V C 16 V + L Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (I) Capacitance (μF)  K '$ K B±0.2 Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. (I) Example:6.3 V 22 μF Marking color : BLACK ( ) Reference size D L A, B H I W P K 4.0 5.4 + 0.1 - 0.2 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.15 0.35+- 0.20 + 0.1 - 0.2 0.15 0.35+- 0.20 C 5.0 5.4 5.3 6.5 max. 2.2 0.65±0.1 1.5 D 6.3 5.4 +- 0.1 0.2 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.15 0.35+- 0.20 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.15 0.35+- 0.20 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-35 – PDF
Документация на EEEFC0J101V 

AEC_V-FC_E.indd

Дата модификации: 24.03.2014

Размер: 78.9 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)