EEE0JA331XAP

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 6.3 В x 330 мкФ ±20%, SMD, -40...85 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии S(A)_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×6.6 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2626
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEE0JA331XP (PAN)
 
— в ленте 900 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2626
A+ 6SVPC330M (PAN)
 
— в ленте 1000 шт — — — —
A+ EEEFP1A331AP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFNA331XUP (PAN)
 
— в ленте 900 шт — — — — V-FN, 10V, 330uF, 105°C, 2000h, 6.3x7.7mm, ripple 280mArms, 0.34Ohm
A+ EEEFK1A331P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ CDS006M331E06PKKKV00R (SUSCON)
 
— в ленте 1000 шт — — — — — —
A+ 6SVP330M (PAN)
 
— 500 шт — — — —
A+ EEEFK0J331XP (PAN)
 
— в ленте 900 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2626
A+ EEEFK0J331P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEETC1A331P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ CA010M0330REF-0810 (YAG)
 

ECAPSMD 330/10V 0810 CA (YAG) 		— в ленте 500 шт конденсатор алюминиевый SMD 330 мкФ 10 В -40...85 °C 2000 ч — — — Surface Mount Aluminum electrolytic
A+ EEEFPJ331XAP (PAN)
 
— в ленте 900 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2626
A+ EEE0JA331P (PAN)
 
— в ленте 1000 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEETP1A331AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFP0J331AP (PAN)
 
— в коробках 1000 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEE1AA331P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEETC1A331UP (PAN)
 
— 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFN0J331XV (PAN)
 
— 900 шт — — — — V-FN, Vibration proof, 6.3V, 330uF, 105°C, 2000h, 6.3x7.7mm, ripple 280mArms, 0.34Ohm
A+ EEEFN0J331XP (PAN)
 
— 900 шт — — — — V-FN, 6.3V, 330uF, 105°C, 2000h, 6.3x7.7mm, ripple 280mArms, 0.34Ohm
A+ EEEFN0J331XL (PAN)
 
— — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 6.3V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 2626
A+ EEEFH0J331L (PAN)
 
— в ленте 500 шт — — — V-FH / 6.3V / 330uF / 105°C / 10000h / 8x10.2mm / ripple 600mArms / ESR 0.2Ohm
A+ EEETPA331UAP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ 10SVP330MX (PAN)
 
— в ленте 500 шт — — — —
A+ VP010M331E9BPKKKV00R (SUSCON)
 
— — — — — — —
A+ EEETC1A331UV (PAN)
 
— 500 шт
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333

Сопутствующие товары 23

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-D010K337T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-E010K337T (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
 TANT73434373X43X43MM —
CA45L-D6R3K337TE150 (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-C6R3K337T (XIANGYEE)
 
TANT60322860X32X28MM в ленте 500 шт
 
 TANT60322860X32X28MM —
6TPF330M9L (PAN)
 
— в ленте 2500 шт — —
6TPE330ML (PAN)
 
— в ленте 2500 шт — —
6TPE330MAP (PAN)
 
— в ленте 3000 шт — —
6TPC330MA (PAN)
 
— в ленте 3000 шт — —
10TPE330M (PAN)
 
— в ленте 2000 шт — —
10TPB330M (PAN)
 
— в ленте 2000 шт — —
CA45-D010M337T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45L-E010K337TE150 (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45L-D6R3M337TE150 (XIANGYEE)
 
TANT73433173X43X31MM
 
 TANT73433173X43X31MM —
CA45L-D010M337TE150 (XIANGYEE)
 
TANT73433173X43X31MM
 
 TANT73433173X43X31MM —
CA45L-D010K337TE150 (XIANGYEE)
 
TANT73433173X43X31MM 500 шт
 
 TANT73433173X43X31MM —
CA45-V010M337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-V010K337T (XIANGYEE)
 
TANT73613873X61X38MM
 
 TANT73613873X61X38MM —
CA45-E6R3M337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E6R3K337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-E010M337T (XIANGYEE)
 
TANT73434373X43X43MM
 
 TANT73434373X43X43MM —
CA45-D6R3M337T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-D6R3K337T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
 TANT73433173X43X31MM —
CA45-C6R3M337T (XIANGYEE)
 
TANT60322860X32X28MM
 
 TANT60322860X32X28MM —

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type S series High temperature Lead-Free reflow (suffix : A✽) Features ● ● ● ● Endurance : 85 ℃ 2000 h Vibration-proof product (30G guaranteed) is available upon request. (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –40 ℃ to +85 ℃ 6.3 V to 50 V 1 μF to 1500 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 (Impedance ratio at 120 Hz) Z (-25 ℃) / Z (+20 ℃) 4 3 2 2 2 2 Z (-40 ℃) / Z (+20 ℃) 8 6 4 4 3 3 After applying rated working voltage for 2000 h (Bi-polar:1000 h for each polarity) at +85 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Within ±20 % of the initial value Size code Capacitance change Capacitance change D8 (ø6.3) 2000 hours ±25 % ≦ D (ø6.3) Miniature 1000 hours ±30 % Dissipation factor (tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 h at +85 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor (tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency（Hz） Correction factor 50, 60 0.70 1k 1.30 Dimensions 0.3 max. products (Black dot) Rated voltage（V） (6=6.3 V) （P） W L （S) or（A) Mark for Lead-Free B±0.2 H Series indentification （I） Capacitance (μF) øD±0.5 Negative polarity marking (–) Lot number A±0.2 K Example : 6.3 V 22 μF Marking color : BLACK 22 6S 10 k to 1.70 （I） Marking 120 1.00 Pressure Relief（ø10and larger） ( )Reference size Unit：mm Size code øD L B 4.0 5.4 +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 A、B H I W P 4.3 5.5 max. 1.8 0.65±0.1 K 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 1.0 0.35 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 C 5.0 5.4 D 6.3 5.4 D８ 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 G ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEE0JA101WAR 

Series catalog

Дата модификации: 24.09.2021

Размер: 651.5 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : S Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 85 °C 2000 h product is available upon request. (08 mm and larger) ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +85 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Miniaturization product type 1000 hours) at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meer the following limits. Within ±20 % of the initial value Size code Cap. change Capacitance change D8 (06.3×7.7) 2000 hours ±25 % 1000 hours ±30 % < D (06.3) Miniature < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 6S Lot number Series indentification (S) or (A) Mark for Lead-Free products (Black dot) Rated voltage (V.DC) (6=6.3 V.DC) A±0.2 (P) H 0D±0.5 Negative polarity marking (–) – + L W Pressure Relief (010 and larger) Size code 0D B 4.0 C 5.0 D 6.3 D8 6.3 E 8.0 F 8.0 G 10.0 L A, B (I) 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK K (I) Dimensions B±0.2 Marking ( ) Reference size (Unit : mm) H. 4.3 5.5 max 5.4 +0.1 -0.2 5.4 +0.1 5.3 6.5 max -0.2 5.4 +0.1 6.6 7.8 max -0.2 7.7±0.3 6.6 7.8 max 6.2±0.3 8.3 9.5 max 10.2±0.3 8.3 10.0 max 10.2±0.3 10.3 12.0 max I W P K 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 PDF
Документация на серию S(A)_SMD 

N_AEC_V-SA_E.indd

Дата модификации: 27.03.2019

Размер: 87.4 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)