2TPSF270M6E

Panasonic Industrial Europe GmbH
Конденсатор танталовый 2 В, 270 мкФ ±20%, корпус B2S, SMD_3528-19, -55...105 °C
развернуть ▼ свернуть ▲
Внешний вид семейства POSCAP

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Эквивалентное последовательное сопротивление
Код корпуса производителя
Способ монтажа
Ток утечки
Температура рабочая
Размер 3.5×2.8×1.9 мм
  Примечание: Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 1411
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение ESR Код корпуса производителя Способ монтажа Шаг Ток утечки Срок службы Применение Температура рабочая Примечание Карточка
товара
P- 2TPSF270M9G (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 1411
A+ ETPSF270M6E (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 2.5V, 20% +Tol, 20% -Tol, 270uF, Surface Mount, 1411

Файлы 4

показать свернуть
Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TPSF series Features ● Super low ESR (6 mΩ max.) ● Super low ESL (0.7 nH max.) ● Face down terminal type ● RoHS compliance, Halogen free Specifications Size code Category temp. range Rated volt. range Category volt. range Rated cap. range Capacitance tolerance Leakage current Dissipation factor(tan δ) Surge voltage (V) B2S –55 ℃ to +105 ℃ 2.0 V to 2.5 V 2.0 V to 2.5 V 270 μF ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 ℃ 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor(tan δ) ≦ 1.5 times of the initial limit Leakage current Within the initial limit +60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value Dissipation factor(tan δ) ≦ 1.5 times of the initial limit Leakage current ≦ 3 times of the initial limit Endurance Damp heat (Steady State) Marking Dimensions (not to scale) Rated voltage code L W Polarity marking (+) Lot. No. H Rated capacitance code R.voltage code Unit：V d e 2.0 2.5 R.capacitance code L8 S Size code B2S Unit：μF 270 W1 S L±0.2 W±0.2 3.5 2.8 H±0.1 1.9 Unit：ｍｍ S±0.3 W1±0.1 0.8 2.2 * Externals of figure are the reference. Characteristics list Rated voltage (V) 2.0 2.5 Case size Rated temperature (℃) Category voltage (V) Category temperature (℃) Rated capacitance (μF) 105 105 105 2.0 2.0 2.5 105 105 105 270 Specifications （ｍｍ） L W H Size *1 code Ripple current (mA rms) 3.5 3.5 3.5 2.8 2.8 2.8 1.9 1.9 B2S 1.9 3200 2400 3200 ESR*2 (mΩ max.) 6/500 kHz 9/300 kHz 6/500 kHz tan δ*3 0.08 0.08 0.08 Floor life level Standard LC*4 (μA) 108.0 108.0 135.0 Part number Min. packaging q'ty (pcs) 2TPSF270M6E 2TPSF270M9G ETPSF270M6E *1: Ripple current (100 kHz / +45 ℃) *2: ESR (100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) ◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" . Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Reflow temp Reflow temp ≦260℃ ≦250℃ 5 5 3 3 2000 2000 2000 *4: After 5 minutes 18-Jun-18 PDF
Документация на 2TPSF270M6E 

Series catalog

Дата модификации: 21.04.2022

Размер: 402.1 Кб

5 стр.

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TPSF series Features ● Super low ESR (6 mΩ max.) ● Super low ESL (0.7 nH max.) ● Face down terminal type ● RoHS compliance, Halogen free Specifications Size code Category temp. range Rated volt. range Category volt. range Rated cap. range Capacitance tolerance Leakage current Dissipation factor(tan δ) Surge voltage (V) B2S –55 ℃ to +105 ℃ 2.0 V to 2.5 V 2.0 V to 2.5 V 270 μF ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 ℃ 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value Dissipation factor(tan δ) ≦ 1.5 times of the initial limit Leakage current Within the initial limit +60 ℃, 90 % to 95 % RH, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value Dissipation factor(tan δ) ≦ 1.5 times of the initial limit Leakage current ≦ 3 times of the initial limit Endurance Damp heat (Steady State) Marking Dimensions (not to scale) Rated voltage code L W Polarity marking (+) Lot. No. H Rated capacitance code R.voltage code Unit：V d e 2.0 2.5 R.capacitance code L8 S Size code B2S Unit：μF 270 W1 S L±0.2 W±0.2 3.5 2.8 H±0.1 1.9 Unit：ｍｍ S±0.3 W1±0.1 0.8 2.2 * Externals of figure are the reference. Characteristics list Rated voltage (V) 2.0 2.5 Case size Rated temperature (℃) Category voltage (V) Category temperature (℃) Rated capacitance (μF) 105 105 105 2.0 2.0 2.5 105 105 105 270 Specifications （ｍｍ） L W H Size *1 code Ripple current (mA rms) 3.5 3.5 3.5 2.8 2.8 2.8 1.9 1.9 B2S 1.9 3200 2400 3200 ESR*2 (mΩ max.) 6/500 kHz 9/300 kHz 6/500 kHz tan δ*3 0.08 0.08 0.08 Floor life level Standard LC*4 (μA) 108.0 108.0 135.0 Part number Min. packaging q'ty (pcs) 2TPSF270M6E 2TPSF270M9G ETPSF270M6E *1: Ripple current (100 kHz / +45 ℃) *2: ESR (100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) ◆ Please refer to each page in this catarog for “Reflow conditions” ,“Taping specifications” and "Floor life level" . Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Reflow temp Reflow temp ≦260℃ ≦250℃ 5 5 3 3 2000 2000 2000 *4: After 5 minutes 18-Jun-18 PDF
Документация на 2TPSF270M6E 

Series catalog

Дата модификации: 10.11.2021

Размер: 315 Кб

5 стр.

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPSF Features ● Super low ESR (6 mΩ max.) low ESL (0.7 nH) ● Face down terminal type ● RoHS compliance, Halogen free ● Super Specifications Size code B2S Category temperature range –55 °C to +105 °C Rated voltage range 2.0 V.DC to 2.5 V.DC Category voltage range 2.0 V.DC to 2.5 V.DC Rated capacitance range 270 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Rated voltage × 1.15 Surge voltage (V.DC) +105 °C, 1000 h rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code R. Voltage (V.DC) Code 2.0 d R. Cap. (μF) Code 270 L8 H W Polarity marking(+) R. Voltage code Lot. No. S 2.5 e W1 S Unit : mm Size code L±0.2 B2S 3.5 W±0.2 2.8 H±0.1 1.9 S±0.3 0.8 W1±0.1 2.2 ✽ Externals of figure are the reference. Characteristics list Case size (mm) Specifications Rated Rated Category Category Rated Size Ripple ✽1 ✽2 Series voltage temp. voltage temp. capacitance code current ESR tan d ✽3 (V.DC) (°C) (V.DC) (°C) (μF) L W H (mΩ max.) (mAr.m.s.) 105 2.0 105 3.5 2.8 1.9 3200 6/500 kHz 0.08 2 270 TPSF 105 2.0 105 3.5 2.8 1.9 B2S 2400 9/300 kHz 0.08 2.5 105 2.5 105 270 3.5 2.8 1.9 3200 6/500 kHz 0.08 Standard Floor life Min. Reflow Reflow LC Part number Packaging Q'ty Temp Temp (μA) (pcs) < 260°C < 250°C 108 2TPSF270M6E 2000 5 5 ✽4 108 2TPSF270M9G 2000 135 ETPSF270M6E 2000 3 3 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jun. 2018 PDF
Документация на серию TPSF_POSSCAP 

Series catalog

Дата модификации: 27.03.2019

Размер: 202.5 Кб

2 стр.

2018 Products Catalog Conductive Polymer Tantalum Solid Capacitors PDF
Документация на семейство POSCAP 

Products catalog

Дата модификации: 18.12.2018

Размер: 2.13 Мб

34 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    10TPB150ML (PAN)