Вход / Регистрация

SP-750-48 PBF

MEAN WELL
SP-750 750W Single Output Power Supply series ■ Features : Universal AC input / Full range AC input active surge current limiting Built-in active PFC function,PF>0.96 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan High power density 5.48/inch Built-in constant current limiting circuit With power good and ...
развернуть ▼ свернуть ▲
Фотография серии SP-750
Чертеж серии SP-750
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Напряжение 1 канала
Выходной ток 1 канала
Типы защиты THERMAL; OVER LOAD; OVER VOLTAGE; SHORT CIRCUIT
Количество выходов
Входное напряжение AC
КПД
Рабочая температура
Примечание AC-DC Power Factor Correction Module, 1 Output, 753.6W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
SP-750 750W Single Output Power Supply series ■ Features : Universal AC input / Full range AC input active surge current limiting Built-in active PFC function,PF>0.96 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan High power density 5.48/inch Built-in constant current limiting circuit With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty 3 Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 MODEL OUTPUT INPUT SP-750-5 SP-750-12 SP-750-15 SP-750-24 SP-750-27 SP-750-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 120A 62.5A 50A 31.3A 27.8A 15.7A CURRENT RANGE 0 ~ 120A 0 ~ 62.5A 0 ~ 50A 0 ~ 31.3A 0 ~ 27.8A 0 ~ 15.7A RATED POWER 600W 750W 750W 751.2W 750.6W 753.6W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.5V 13.5 ~ 16.5V 22 ~ 26.4V 24 ~ 30V 43 ~ 56V ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% LINE REGULATION ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±2.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 50ms/230VAC HOLD UP TIME (Typ.) 16ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 89% 89% 90% 31 ~ 36.5V 57.6 ~ 67.2V FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.96/230VAC EFFICIENCY (Typ.) AC CURRENT (Typ.) 80% INRUSH CURRENT (Typ.) 8.8A/115VAC 27A/115VAC LEAKAGE CURRENT <2.0mA / 240VAC FUNCTION OVER VOLTAGE OVER TEMPERATURE POWER GOOD/FAIL REMOTE CONTROL 50ms/1ms TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 5) EMC EMISSION DIMENSION PACKING NOTE 87% 4.2A/230VAC 45A/230VAC Note.4 RC+/RC- short power on, open power off WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY OTHERS PF>0.99/115VAC at full load 85% Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. EMC IMMUNITY MTBF 16ms/115VAC at full load 127 ~ 370VDC 105 ~ 125% rated output power Protection type : Constant current limiting, unit will Hiccup after 3 sec. 5.75 ~ 6.75V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover OVERLOAD PROTECTION 1500ms, 50ms/115VAC at full load -20 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.05%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011 (CISPR11), EN55032 (CISPR32) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A 105.4K hrs min. MIL-HDBK-217F (25℃) 278*127*63.5mm (L*W*H) 2.9Kg; 6pcs / 18.4Kg / 0.98CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply unit will have no output if the shorting connector is not assembled between RC+ & RC-. 5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:SP-750-SPEC 2018-01-04 PDF
Документация на SP-750-5 

SP-750.cdr

Дата модификации: 11.01.2018

Размер: 89.6 Кб

3 стр.

SP-750 750W Single Output Power Supply series Features : Universal AC input/Full range AC input active surge current limiting Built-in active PFC function,PF>0.96 Protections:Short circuit, overload, over voltage, over temperature Forced air cooling by built-in DC ball bearing fan 3 High power density 5.48/inch Built-in constant current limiting circuit With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL OUTPUT INPUT SP-750-5 SP-750-12 SP-750-15 SP-750-24 SP-750-27 SP-750-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 120A 62.5A 50A 31.3A 27.8A 15.7A CURRENT RANGE 0 ~ 120A 0 ~ 62.5A 0 ~ 50A 0 ~ 31.3A 0 ~ 27.8A 0 ~ 15.7A RATED POWER 600W 750W 750W 751.2W 750.6W 753.6W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.5V 13.5 ~ 16.5V 22 ~ 26.4V 24 ~ 30V 43 ~ 56V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 50ms/230VAC HOLD TIME (Typ.) 16ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.96/230VAC EFFICIENCY (Typ.) AC CURRENT (Typ.) 81% INRUSH CURRENT (Typ.) LEAKAGE CURRENT <2.0mA / 240VAC 85 OVER TEMPERATURE 87% 89% 5 89% 90% 31 ~ 36.5V 57.6 ~ 67.2V 4.2A/230VAC 45A/230VAC (TSW1 ) Detect on heatsink of power transistor 85 5 (TSW2 ) Detect on heatsink of power diode 50ms/1ms Note.5 RC+/RC- short power on, open power off WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY SAFETY STANDARDS WITHSTAND VOLTAGE PF>0.99/115VAC at full load Protection type : Shut down o/p voltage, recovers automatically after temperature goes down POWER GOOD/FAIL TEMP. COEFFICIENT VIBRATION 16ms/115VAC at full load 127 ~ 370VDC 105 ~ 125% rated output power Protection type : Constant current limiting, unit will Hiccup after 3 sec. 5.75 ~ 6.3V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover PROTECTION OVER VOLTAGE REMOTE CONTROL 1500ms, 50ms/115VAC at full load 85% 8.8A/115VAC 27A/115VAC OVER LOAD FUNCTION 1.0% -20 ~ +60 (Refer to output load derating curve) 20~90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B EMI CONDUCTION & RADIATION EMC (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2, EN61204-3 Heavy industry level, criteria A 769.3K hrs min. MIL-HDBK-217F (25 278*127*63.5mm (L*W*H) 2.9Kg; 6pcs / 18.4Kg / 0.98CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. The power supply unit will have no output if the shorting connector is not assembled between RC+ & RC-. File Name:SP-750-SPEC 2006-10-17 PDF
Документация на серию SP-750 

\\Fileserver-s\doc-control\do

Дата модификации: 09.11.2006

Размер: 345.5 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155A (MW)