Вход / Регистрация

RSP-1500-5 PBF

MEAN WELL
RSP-1500 1500W Single Output Power Supply series Features : Universal AC input/Full range ZVS new technology AC input active surge current limiting High efficiency up to 91% Built-in active PFC function,PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan Output voltage can be trimmed between 70~100% of the rate...
развернуть ▼ свернуть ▲
Фотография серии RSP-1500
Чертеж серии RSP-1500
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Типы защиты OVER CURRENT; OVER VOLTAGE; THERMAL: SHORT CIRCUIT
Количество выходов
Входное напряжение AC
КПД
Рабочая температура
Примечание AC-DC Power Factor Correction Module, 1 Output, 1200W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
RSP-1500 1500W Single Output Power Supply series Features : Universal AC input/Full range ZVS new technology AC input active surge current limiting High efficiency up to 91% Built-in active PFC function,PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan Output voltage can be trimmed between 70~100% of the rated output voltage High power density 8.3W/inch 3 Current sharing up to 6000W(3+1) Alarm signal output Built-in 12V/0.1A auxiliary output for remote control Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL OUTPUT RSP-1500-5 RSP-1500-12 RSP-1500-15 RSP-1500-24 RSP-1500-27 RSP-1500-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 240A 125A 100A 63A 56A 32A CURRENT RANGE 0 ~ 240A 0 ~ 125A 0 ~ 100A 0 ~ 63A 0 ~ 56A 0 ~ 32A RATED POWER 1200W 1500W 1500W 1512W 1512W 1536W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.5V 13.5 ~ 16.5V 20 ~ 26.4V VOLTAGE TOLERANCE Note.3 INPUT 4.5 ~ 5.5V 2.0% 24 ~ 30V 43 ~ 56V 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 100ms at full load HOLD UP TIME (Typ.) 10ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47~63Hz POWER FACTOR (Typ.) 0.95/230VAC EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 17A/115VAC 30A/115VAC LEAKAGE CURRENT <2.0mA / 240VAC 14ms at full load 16ms at full load 127 ~ 370VDC 0.98/115VAC at full load 87% 87% 90% 90% 91% 8A/230VAC 60A/230VAC 105 ~135% rated output power OVERLOAD Note.5 PROTECTION OVER VOLTAGE OVER TEMPERATURE Protection type : Constant current limiting unit will shut down o/p voltage after 5sec. Re-power on to recover 5.75 ~ 6.75V 13.8 ~ 16.8V 17 ~ 20.5V 27.6 ~ 32.4V 31 ~ 36.5V AUXILIARY POWER(AUX) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 12V@0.1A(Only for Remote ON/OFF control) REMOTE ON/OFF CONTROL Please see the Function Manual FUNCTION ALARM SIGNAL OUTPUT OUTPUT VOLTAGE TRIM Please see the Function Manual Please see the Function Manual CURRENT SHARING Please see the Function Manual WORKING TEMP. -20 ~ +70 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW2 ) Detect on heatsink of power transistor (Refer to output load derating curve) 20~90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 62.6K hrs min. MIL-HDBK-217F (25 278*127*83.5mm (L*W*H) 2.6Kg; 6pcs/16.6Kg/1.54CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:RSP-1500-SPEC 2007-03-19 PDF
Документация на серию RSP-1500 

RSP-1500.cdr

Дата модификации: 20.03.2007

Размер: 294.3 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155A (MW)