Вход / Регистрация

LPS-75-24

MEAN WELL
AC/DC преобразователь: открытый; 75 Вт; выход 24В @ 3.2А; вход: 90...264VAC / 127...370VDC; -20...70°C
развернуть ▼ свернуть ▲
Фотография серии LPS-75
Чертеж серии LPS-75
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 222×55×30 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ RPS-75-24 (MW)
 
— в коробках 63 шт Преобразователь напряжения AC-DC на шасси. 76.8Вт,Uвх=90-264В AC(127-370В DC), выход 24... КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ ELP-75-24 (MW)
 
— 1 шт — —

Файлы 2

показать свернуть
LPS-75 75W Single Output Switching Power Supply series User’s Manual ■ Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection PWM control and regulated Small and compact size Built-in remote ON-OFF control LED indicator for power on 100% full load burn-in test 2 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION UL62368-1 MODEL INPUT LPS-75-3.3 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 3.3V 5V 12V 15V 24V 48V RATED CURRENT 15A 15A 6.2A 5A 3.2A 1.56A CURRENT RANGE 0 ~ 16.5A 0 ~ 16.5A 0 ~ 6.8A 0 ~ 5.5A 0 ~ 3.5A 0 ~ 1.7A RATED POWER 49.5W 75W 74.4W 75W 76.8W 75W 82.5W 81.6W 82.5W 84W 74.88W 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p Note.4 54.45W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 3 ~3.5V VOLTAGE TOLERANCE Note.3 ±3.0% 22 ~ 27V 45 ~ 54V ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±3.0% ±3.0% ±2.0% ±2.0% ±1.0% ±1.0% SETUP, RISE TIME 100ms, 35ms/230VAC HOLD UP TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 81% 83% 83% 27.6 ~ 32.4V 57.6 ~ 67.2V 100ms, 35ms/115VAC at full load 12ms/115VAC at full load 127 ~ 370VDC EFFICIENCY(Typ.) 69% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.9A/115VAC 1.1A/230VAC COLD START 18A/115VAC 36A/230VAC OVERLOAD REMOTE ON/OFF WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 5) EMC EMISSION 77% 80% <1mA / 240VAC 115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off -20 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 MTBF 355Khrs min. MIL-HDBK-217F (25℃) 222*55*30mm (L*W*H) 0.3Kg; 48pcs/15.6Kg/1.23CUFT DIMENSION PACKING NOTE 13.5 ~ 16.5V ±2.0% ±1.0% WORKING TEMP. OTHERS 11 ~ 13.5V ±2.0% LOAD REGULATION OVER VOLTAGE FUNCTION 4.75 ~ 5.5V ±3.0% LINE REGULATION LEAKAGE CURRENT PROTECTION TPTC004 DC VOLTAGE PEAK LOAD(10sec.) OUTPUT BS EN/EN62368-1 IEC62368-1 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:LPS-75-SPEC 2021-09-15 PDF
Документация на LPS-75-5 

LPS-75-20210915.cdr

Дата модификации: 26.11.2021

Размер: 93.9 Кб

2 стр.

LPS-75 75W Single Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection PWM control and regulated Small and compact size Built-in remote ON-OFF control LED indicator for power on 100% full load burn-in test 2 years warranty SPECIFICATION MODEL LPS-75-3.3 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 15A 15A 6.2A 5A 3.2A 1.56A CURRENT RANGE 0 ~ 16.5A 0 ~ 16.5A 0 ~ 6.8A 0 ~ 5.5A 0 ~ 3.5A 0 ~ 1.7A RATED POWER 49.5W 75W 74.4W 75W 76.8W 75W 82.5W 81.6W 82.5W 84W 81.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 11 ~ 13.5V 13.5 ~ 16.5V PEAK LOAD(10sec.) OUTPUT Note.4 54.45W VOLTAGE TOLERANCE Note.3 INPUT 22 ~ 27V 45 ~ 54V 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 3.0% 2.0% 2.0% 1.0% 1.0% SETUP, RISE TIME 100ms, 35ms/230VAC HOLD TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 100ms, 35ms/115VAC at full load 12ms/115VAC at full load 127 ~ 370VDC 77% 80% EFFICIENCY(Typ.) 69% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.9A/115VAC 1.1A/230VAC COLD START 18A/115VAC 36A/230VAC 81% LEAKAGE CURRENT <1mA / 240VAC OVER LOAD 115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION FUNCTION 3 ~3.5V 3.0% REMOTE ON/OFF WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 83% 83% 27.6 ~ 32.4V 57.6 ~ 67.2V RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 5) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55011, EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A 355Khrs min. MIL-HDBK-217F (25 ) 222*55*30mm (L*W*H) 0.3Kg; 48pcs/15.6Kg/1.12CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:LPS-75-SPEC 2006-04-13 PDF
Документация на серию LPS-75 

LPS-75.cdr

Дата модификации: 22.04.2006

Размер: 297.2 Кб

2 стр.

    Публикации 1

    показать свернуть
    24 апреля 2024
    новость

    MEAN WELL – эксперт по источникам питания. 100 вопросов о ИП MW

    Производя более 10 тысяч стандартных и ряд специализированных моделей источников питания и придерживаясь принципа полной поддержки клиентов, крупнейший мировой производитель ИП, компания MEAN WELL, подготовила список часто задаваемых вопросов о... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    ADD-155B (MW)