CEN-100-36

MEAN WELL
ИП для светодиодного освещения: 100 Вт; 2650 мА / 36 В (стаб. по току или напр.); вход: 90…264 В; IP66
развернуть ▼ свернуть ▲
Фотография серии CEN-100
Чертеж серии CEN-100
 
 
  • Группа: LED-драйверы  
  • Серия: CEN-100  
  • Корпус: —
  • Норма упаковки: 1  шт. (в коробках)
  • снято с производства

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты КЗ, перегрузка, перенапряжение, перегрев
Температура рабочая
Размер 195×62.5×40.5 мм
Применение
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
CEN-100 100W Single Output LED Power Supply series ½ Features : Universal AC input / Full range (up to 295VAC) Protections: Short circuit / Overload / Over voltage / Over temperature Output voltage and constant current level adjustable Built-in active PFC function IP66 design for indoor or outdoor installations Cooling by free air convection 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location and outdoor application 3 years warranty F 110 SELV SPECIFICATION MODEL DC VOLTAGE CEN-100-20 CEN-100-24 CEN-100-30 CEN-100-36 CEN-100-42 CEN-100-48 CEN-100-54 20V 24V 30V 36V 42V 48V 54V 15.6 ~ 24V 19.5 ~ 30V 23.4 ~ 36V 27.3 ~ 42V 31.2 ~ 48V 35.1 ~ 54V CONSTANT CURRENT OPERATION VOLTAGE Note.5 13 ~ 20V OUTPUT RATED CURRENT 4.8A 4A 3.2A 2.65A 2.28A 2A 1.77A CURRENT RANGE 0 ~ 4.8A 0 ~ 4A 0 ~ 3.2A 0 ~ 2.65A 0 ~ 2.28A 0 ~ 2A 0 ~ 1.77A RATED POWER 96W 96W 96W 95.4W 95.76W 96W 95.58W RIPPLE & NOISE (max.) Note.2 2.0Vp-p 2.7Vp-p 3Vp-p 3.6Vp-p 4Vp-p 4.6Vp-p 5Vp-p VOLTAGE ADJ. RANGE (SVR1) 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 37 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE(SVR2) 3.12 ~ 4.8A 2.6 ~ 4A 2.08 ~ 3.2A 1.72 ~ 2.65A 1.48 ~ 2.28A 1.3 ~ 2A 1.15 ~ 1.77A VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% 5.0% LOAD REGULATION 3000ms / 230VAC 5000ms / 115VAC at full load SETUP TIME VOLTAGE RANGE INPUT Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF 0.9 at 65 ~ 100% load, 115VAC / 230VAC ; PF>0.97 / 115VAC EFFICIENCY(Typ.) 88% AC CURRENT INRUSH CURRENT(Typ.) 1.4A/115VAC 60A/230VAC 89% 90% PF>0.95 / 230VAC at full load 90% 90% 91% <0.75mA / 240VAC OVER CURRENT 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 91% 0.7A/230VAC LEAKAGE CURRENT SHORT CIRCUIT PROTECTION IP66 Hiccup mode, recovers automatically after fault condition is removed 22.8 ~ 26V 28 ~ 32V 34 ~ 38V 41 ~ 46V 47 ~ 52V 54 ~ 60V 59 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover 85 10 (RTH1) Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to output load derating curve) 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS TUV EN61347-1, EN61347-2-13, IP66 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG: >100M Ohms / 500VDC / 25 / 70% RH SAFETY & EMI CONDUCTION & RADIATION Compliance to EN55015 EMC Compliance to EN61000-3-2 Class C ( 65% load) ; EN61000-3-3 HARMONIC CURRENT Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level (surge 4KV), criteria A EMS IMMUNITY ISOLATION RESISTANCE MTBF OTHERS DIMENSION PACKING NOTE 519.5Khrs min. MIL-HDBK-217F (25 193*62.5*40.5mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/1.11CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Direct connecting to LEDs is not suggested for models with “RIPPLE & NOISE” > 10% and using additional drivers is highly recommended. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the derating curve for more details. 5. Constant current operation region is within 65% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:CEN-100-SPEC 2010-03-15 PDF
Документация на серию CEN-100 

CEN-100.cdr

Дата модификации: 18.03.2010

Размер: 157 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    CEN-100-24 (MW)