TE6630AN

Mornsun
Signal conditioning modules TExxxxAN Series FEATURES Signal conditioning modules  Two-port isolation (signal input and signal output) High accuracy of 0.1% Full Scale High linearity of 0.1% Full Scale Isolation test voltage 2kVAC for 60s Extremely low temperature coefficient of ≤50PPM/℃ Industrial grade operating temperature range from -40℃ to +85℃ High reliability, MTBF >500,000 hours ...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Тип
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Signal conditioning modules TExxxxAN Series FEATURES Signal conditioning modules  Two-port isolation (signal input and signal output) High accuracy of 0.1% Full Scale High linearity of 0.1% Full Scale Isolation test voltage 2kVAC for 60s Extremely low temperature coefficient of ≤50PPM/℃ Industrial grade operating temperature range from -40℃ to +85℃ High reliability, MTBF >500,000 hours Low ripple & noise: ≤35mVpp, 20MHz ESD protection to IEC/EN61000-4-2, Contact ±4kV with performance Criteria B  Compact DIP18 package, size 26 x 9.5 x 12.5mm  Signal load capacity ≥2kΩ (@ signal output 10V Max.)         RoHS EN60950-1 TExxxxAN series are analog signal isolation modules with incoming positive/negative signal input and transformed positive signal output. They are equipped with an efficient built-in micro-power source that supplies additionally power to the internal input signal circuitry. The adopted electromagnetic isolation technology has a better performance, a much higher accuracy and a lower temperature drift in comparison with photo/opto-coupler isolators. This type of product has in addition to low temperature drift and high linearity, a low power consumption and low ripple & noise. They have a two-terminal isolation from signal input to signal output/power input. Selection Guide Certification EN Input Signal Output Signal TE5530AN Power Supply Input Typ. (VDC) 24 -10V to 10V 0 - 10V NC TE5650AN 12 -10V to 10V 0 - 5V NC TE6630AN 24 -5V to 5V 0 - 5V NC TE6650AN 12 -5V to 5V 0 - 5V NC Part No. Isolated Power Output (VDC) Input Specifications Item Operating Conditions Input Voltage Power Input Signal Input Value Typ. ±5% Input Power Signal full load ≤1W Power Protection Input reverse polarity protection Input Signal See selection guide Input Impedance In case of max. input of voltage signal ≥10MΩ Over Range Maximum continuous over range ±30VDC Operating Conditions Value Output Specifications Item Output Signal Signal Output See selection guide Load Capacity Voltage output ≥2kΩ Load Regulation Full scale output ≤0.05% Power Regulation Power voltage Typ. ±5% ≤0.05% Ripple & Noise Bandwidth 20MHz ≤35mVpp Operating Conditions Value Transmission Specifications Item Zero Offset 0.1%FS Signal Precision Temperature Coefficient 0.1%FS Operating temperature range from -40 to +85℃ ≤50PPM/℃ Band Width ≥2kHz Response Time ≤1ms 2021.09.28-A/4 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на TE6650AN 

TExxxxAN Keywords:

Дата модификации: 28.12.2021

Размер: 1.15 Мб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    T1100L-F (MORNSUN)