SCM1212BTA-Q

Mornsun
SCM1212BTA-Q 3.3 -5V Transformer Driver for Isolated Power Supplies Features Packaging Comply with AEC-Q100 standard and adopt automotive grade process AEC-Q100 automotive approval (Report number : R202210148135-01E) With ±3% buffeting function, reduced conduction and radiation EMI Push-Pull driver controller 2.7-5.5V wide input voltage Low conduction resistance 200mΩ Built-in two powe...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Тип преобразователя
Режим преобразования
Входное напряжение
Максимальный выходной ток
Частота преобразования
Ток собственного потребления
Встроенные возможности Push-Pull driver controller, Soft Start, Internal Switch
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 1

показать свернуть
Тип Наименование Корпус Упаковка i Тип Режим Uвх Uвых Iвых Выходов F преобр Iпотр nmax Опции Примечание T раб Карточка
товара
P= SCM1212BTA (MORNSUN)
 
SOT235 в ленте 3000 шт Push-Pull driver controller, Soft Start, Internal Switch

Файлы 1

показать свернуть
SCM1212BTA-Q 3.3 -5V Transformer Driver for Isolated Power Supplies Features Packaging Comply with AEC-Q100 standard and adopt automotive grade process AEC-Q100 automotive approval (Report number : R202210148135-01E) With ±3% buffeting function, reduced conduction and radiation EMI Push-Pull driver controller 2.7-5.5V wide input voltage Low conduction resistance 200mΩ Built-in two power NMOS, highly symmetrical quasi-complementary drive Limited MOSFET's current when power on Over-current and short circuit protection Over temperature protection Under voltage protection Increase the dead time under light load Third-party Application Isolated Optional Packaging of Product: SOT-23-5 please refer to power supply for CAN, RS485, RS232 and on-board system of controller area network “Order Information” for details of silk screen. Description The SCM1212B-Q is a push-pull power primary side controller integrated with power MOSFET. The chip can work normally under the low input voltage of 3V, and it will not be damaged under the impact of high input voltage of 9V for 1S. There are two drivers inside the chip, which respectively control one flow direction of the current of the primary side winding. Alternately selecting the two drivers can realize the push-pull control of the primary side of the transformer. The driving symmetry of the power MOS inside the chip is high, thereby reducing the bias degree of the push-pull topology. The chip also integrates three key technologies to improve reliability. The first is the soft-start function, which limits the power tube current to avoid damage to the device due to high current impact at startup, and quantitatively guarantees the startup with capacitive load under CC load mode. The second is to integrate the output over-current and short-circuit protection. On the one hand, the judgment and timing of over-current and short-circuit protection are distinguished to control the short-circuit temperature rise while ensuring the capacitive load. On the other hand, the protection threshold is adjusted according to the input voltage and temperature, so that the protection consistency is good, and it is not affected by input changes and temperature changes; the third is over-temperature protection. When the temperature exceeds the specified range, the chip will automatically enter the sleep state, and it will automatically recover when the temperature drops to the set value again. Typical Application Circuit Function Curves 2023.05-A/1 Page 1 of 10 MORNSUN Guangzhou Science & Technology Co.,Ltd.reserves the copyright and right of final interpretation PDF
Документация на SCM1212BTA-Q 

SCM1201A Transformer Driver for Isolated Power Supplies Keywords:

Дата модификации: 20.06.2024

Размер: 2.51 Мб

10 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.