Вход / Регистрация

HPS27W

HOPERF
HPS27W RFM210LB-S1 OOK 无线接收模块 HPS27W PRECISION BAROMETER AND ALTIMETER SENSOR Features          Operation temperature: -40~85℃ Supply voltage: 1.7V to 3.6V Pressure range: 300mBar ~1200mBar Pressure temperature sensitivity: < 0.5Pa/K Pressure sensor resolution: ± 0.006 hPa (or ±5 cm) Average current consumption: @1Hz sampling rate, Standby: Typ 0.5 µA 10-pin LGA, 2.7 mm x ...
развернуть ▼ свернуть ▲
Внешний вид HPS27W

Технические характеристики

показать свернуть
Тип измеряемого давления
Измеряемое давление
Тип выхода
Особенности
Электрическое подключение
Напряжение питания
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
HPS27W RFM210LB-S1 OOK 无线接收模块 HPS27W PRECISION BAROMETER AND ALTIMETER SENSOR Features          Operation temperature: -40~85℃ Supply voltage: 1.7V to 3.6V Pressure range: 300mBar ~1200mBar Pressure temperature sensitivity: < 0.5Pa/K Pressure sensor resolution: ± 0.006 hPa (or ±5 cm) Average current consumption: @1Hz sampling rate, Standby: Typ 0.5 µA 10-pin LGA, 2.7 mm x 2.7 mm x 1.7 mm Stores up to 32 pressure or temperature measurements I2C and SPI (both with optional interrupt) 2.7x2.7x1.7mm Applications          Mobile Altimeter / GPS devices / tablet PCs Industrial Pressure and Temperature Sensor System Adventure and Sports watches Weather Station Equipment Indoor Navigation and Map Assist Data loggers for pressure, temperature and altitude Panel computer Barometers Gas meter Descriptions The HPS27W is a miniaturized Digital Barometric Air Pressure Sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature. The pressure sensor element is based on a capacitive principle which guarantees high precision during temperature changes. The small package makes the HPS27W ideal for mobile applications and wearable devices. The HPS27W result FIFO can store up to 32 measurement results, allowing for a reduced host processor polling rate. Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface. The measurement status is indicated by status bits or interrupts on the SDO pin. Copyright © By HopeRF Rev1.1| Page 1/34 www.hoperf.com PDF
Документация на HPS27W 

Дата модификации: 26.04.2023

Размер: 995.5 Кб

34 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS583730BA01-50 (TE)