HFD5-H/3-LSR

Hongfa
HFD5-H MINIATURE 5TH GENERATION SIGNAL RELAY Features ● The world's first 5th generation signal relay ● Lowest coil power in the signal relay industry 30mW. Coil (3V,5V) operating current≤10mA. Can be directly driven by microprocessor. ● Bifurcated contacts ● Products with electrical endurance ≥3x108ops available, It is an ideal replacement device for small reed relays ● Products compliant wit...
развернуть ▼ свернуть ▲
Внешний вид HFD5-H/1.5-SR

Технические характеристики

показать свернуть
Тип контактов
Номинальное напряжение катушки
Тип тока катушки
Мощность катушки максимальная
Номинальный ток коммутации
Коммутируемое напряжение DC (макс)
Коммутируемое напряжение AC (пиковое)
Напряжение изоляции катушка-контакты
Рабочая температура
Размер 9×4.8×4.9 мм
Способ подключения выводов
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 11

показать свернуть
Тип Наименование Корпус Упаковка i Конфиг Uкатушки AC-DC Pупр(max) Iкомм U dc U ac Изоляция T раб Монтаж Особенности Применение Примечания Тип колодки Магнитная система Семейство Карточка
товара
A- HFD2/003-S-D (HONGFA)
 
— в линейках 25 шт — — —
A- HFD4/3 (HONGFA)
 
— в линейках 50 шт Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 3VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount — —
A- HFD4/3-LSR (HONGFA)
 
— в ленте 900 шт — — —
A- HFD4/3-L (HONGFA)
 
— в линейках 50 шт — — —
A- HFD4/3-S1R (HONGFA)
 
— — — —
A- HFD4/3-SR (HONGFA)
 
— в ленте 40 шт Power/Signal Relay, DPDT, Momentary, 0.046A (Coil), 3VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight — —
A- PK-3V (FORWARD)
 
— — — —
A- HFD2/003-S-L2 (HONGFA)
 
— в линейках 25 шт — AgPd/Ag + gold plated, Plastic sealed — —
A- M4S3HW (FORWARD)
 
— 1 шт — — —
A- HFD3/3 (HONGFA)
 
— 3 шт — AgNi + Au plated, Plastic sealed — —
A- HFD3/3-L1 (HONGFA)
 
— в линейках 40 шт — — —

Файлы 1

показать свернуть
HFD5-H MINIATURE 5TH GENERATION SIGNAL RELAY Features ● The world's first 5th generation signal relay ● Lowest coil power in the signal relay industry 30mW. Coil (3V,5V) operating current≤10mA. Can be directly driven by microprocessor. ● Bifurcated contacts ● Products with electrical endurance ≥3x108ops available, It is an ideal replacement device for small reed relays ● Products compliant with IEC 60079 available ● Products compliant with IEC 60335-1 available ● DIP SMT types available ● Single side stable and latching type available ● Smallest size in signal relay industry: 9.0(L)×4.8(W)×4.9(H) mm File No.：E133481 File No.：R50522293 RoHS compliant CONTACT DATA CHARACTERISTICS Contact arrangement 2C Contact resistance Contact material Ag alloy+Au plated Contact rating 1A 30VDC 0.3A 125VAC Max. switching voltage 125VAC/110VDC Max. switching current 2A Max. switching power 62.5VA/60W Min. applicable load2) 10mV 10μA Mechanical endurance Electrical endurance3) Insulation resistance 100mΩ max. (at 10mA 30mVDC) 1×108OPS 1×105 OPS (70℃,1s on：9s off,NO or NC,1A 30VDC) 1×105 OPS (70℃,1s on：9s off,NO or NC,0.3A 125VAC) 3x108OPS(Only AJ8)4) (40℃ 0.1s on: 0.1s off 2 poles NO or NC Parallel5) 10mA 5VDC) Notes: 1)The data shown above are initial values. 2) Min. applicable load is reference value. Please perform the confirmation test with the actual load before production since reference value may change according to switching frequencies, environmental conditions and expected contact resistance and reliability. 3) Only typical loads are listed above. Other load specifications can be available upon request. 4) (AJ8) indicates products with electrical endurance≥ 3x108 OPS 5) Two sets of NO or NC parallel wiring diagrams (bottom view) are as follows: 1 2 3 4 1 2 8 7 6 5 8 7 6 5 750VAC 1min Dielectric Between coil & contacts strength 1000VAC 1min 1500VAC 1min(413 specification only)(2) 1000VAC 1min 2ms max. 2ms max. 735m/s2 980m/s2 10Hz to 55Hz 3.3mm DA 10Hz to 55Hz 5.0mm DA 5% to 85%RH -40℃ to 70℃ DIP,SMT Approx. 0.5g Plastic sealed Between contact sets Operate time (Set time) Release time (Reset time) Functional Shock resistance Destructive Functional Vibration resistance Destructive Humidity Ambient temperature Termination Unit weight Construction Notes: 1) The data shown above are initial values； 2) (413)indicates products with dielectric withstand voltage between coil and contact 1500VAC 1min,only for DlP type. COIL 3 4 Coil power Orientation mark 1000MΩ(at 500VDC) Between open contacts Temperature rise Orientation mark Single side stable See table“COIL DATA” 1 coil latching See table“COIL DATA” ≤50K(1A Load,at 70℃) 6) For low level and long durability applications, it is recommended to use two sets of NO or NC in parallel. If you need to use a single set of NO or NC, please contact our company. HIGH-FREQUENCY CHARACTERISTICS1) Frequency2) Insertion loss3) V.SWR 3) Isolation3) 100MHz 900MHz 0.03 0.3 1.05 1.4 45dB 25dB Notes: 1)The characteristic impedance of the measuring system is 50Ω. 2)If there is a demand for frequencies higher than 3G,please contact us. 3)The data shown above are initial values. SAFETY APPROVAL RATINGS UL/CUL Ag alloy+Au plated TUV Ag alloy+Au plated 1A 30VDC 0.3A 125VAC 0.3A 110VDC 5mA 500VDC 1A 30VDC 0.3A 125VAC 0.3A 110VDC 5mA 500VDC Notes: 1) Only some typical rating are listed above.If more details are required,please contact us. HONGFA RELAY ISO9001, IATF16949 , ISO14001, ISO45001, IECQ QC 080000, ISO/IEC 27001 CERTIFIED 2024 Rev. 4.00 001 PDF
Документация на серию HFD5-H 

HFD5-H_en.ai

Дата модификации: 02.06.2024

Размер: 749.2 Кб

7 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    TR91-12VDC-SC-A (TS)