CHI931TR

Cosemi
Cosemitech CHA93X/CHI93X Automotive Product Group This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice and Cosemitech assumes no obligation for future manufacture of this product. Contact Cosemitech for the latest status. Preliminary Datasheet 1.3 FEATURES and FUNCTIONAL DIAGRAM • • • • • • • • • • • • • • ...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус TO92S
Тип датчика Переключатель на основе датчика Холла, омниполярный
Рабочая температура
Монтаж
Применение Фиксация приближения магнита (датчик вскрытия порогового магнитного поля)
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
Cosemitech CHA93X/CHI93X Automotive Product Group This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice and Cosemitech assumes no obligation for future manufacture of this product. Contact Cosemitech for the latest status. Preliminary Datasheet 1.3 FEATURES and FUNCTIONAL DIAGRAM • • • • • • • • • • • • • • AEC-Q100 automotive qualified for CHA93X Digital Omnipolar-Switch Hall Sensor Superior Temperature Stability Multiple Sensitivity Options (BOP / BRP): ±25 / ±15 Gauss; ±70 /±35 Gauss; ±100/ ±50 Gauss; On board voltage regulator for 2.5V to 22V range Open Drain Output (25 mA Sink) Resistant to physical stress Output short-circuit protection Operation from unregulated supply Reverse-battery and freewheeling protection Solid-state reliability Wide Operating temperature range: -40 to 150 oC Small package sizes TO-92S, SOT-23 and SOT-89 RoHS-compliant material meets directive 2011/65/EU PACKAGE ⚫ TO-92S SOT-23-3L SOT-89-3L APPLICATIONS -Docking Detection -Door Open and Close Detection -Proximity Sensing -Valve Positioning -Pulse Counting -Flow rate sensing -Robotic control (cylinder position monitoring) -Float-based fluid level sensing -Speed and RPM sensing in fitness equipment DESCRIPTION The CHA93X/CHI93X Hall-effect sensor is extremely temperature-stable and stress-resistant sensor ICs, especially suited for operation over extended temperature ranges from -40°C to 150°C. Superior high temperature performance is possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. The device includes a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. An on-board regulator permits operation with supply voltages of 2.5 to 22 V. The advantage of operating down to 2.5V is that the device can used in 2.5V applications or with additional external resistance in series with the supply pin for greater protection against high-voltage transient events. The CHA93X/CHI93X series is digital Omnipolar Hall switch. When the applied magnetic flux density exceeds the BOP threshold, the chip open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The CHA93X/CHI93X also integrated internal clamps against supply/output transients; output short circuits protection; reverse battery conditions. Three package styles provide a magnetically optimized package for most applications, SOT-23, TO-92S and SOT-89. Each package type is lead (Pb) free (suffix, –T), with a 100% matte-tin-plated lead-frame. Page 1/14 PDF
Документация на CHA931SR 

CH93X_datasheet

Дата модификации: 28.07.2021

Размер: 813.8 Кб

14 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS451 (RUIMENG)