APHB1608SYKSURKC

Kingbright
APHB1608SYKSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS      PACKAGE DIMENSIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wri...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Цвета свечения
Количество цветов в корпусе
Длина волны 1 цвета 630
Длина волны 2 цвета 590
Сила света 1 кристалла
Сила света 2 кристалла
Угол по горизонтали
Угол по вертикали
Тип линзы
Схема включения
Размер 1.6×0.8×0.65 мм
Рабочая температура
Примечания Dual Color LED, Hyper Red/super Bright Yellow, Water Clear, 1.6mm
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
APHB1608SYKSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS      PACKAGE DIMENSIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES         1.6 x 0.8 mm SMD LED, 0.5 mm thickness Compatible with reflow soldering Available in various color combination Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability Halogen-free RoHS compliant APPLICATIONS      RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number Emitting Color (Material) Iv (mcd) @ 20mA [2] ■ Super Bright Yellow (AlGaInP) APHB1608SYKSURKC Viewing Angle [1] Lens Type Min. Typ. 80 150 *80 *150 2θ1/2 130° Water Clear 120 250 *40 *90 ■ Hyper Red (AlGaInP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. © 2021 Kingbright. All Rights Reserved. Spec No: DSAK7903 / 1203011313 Rev No: V.10A Date: 04/07/2021 Page 1 / 4 PDF
Документация на APHB1608SYKSURKC 

APHB1608SYKSURKC(Ver.10A)

Дата модификации: 07.04.2021

Размер: 541.9 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    CLN6A-MKW-CH0K0133 (CREE)