Серия AC-DC сетевых преобразователей RPD-65

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Выходная мощность (ном)
Тип стабилизации
Вход
Конструктивное исполнение
Возможности компактный дизайн, базовая модель
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Размер 127×76×28 мм
Рабочая температура

Документация на серию RPD-65

RPD-65 65W Dual Output Switching Power Supply series User’s Manual ■ Features : Universal AC input/Full range 12V or 24V high peak output current capability Low leakage current<1mA Protections: Short circuit / Overload / Over voltage 60W free air convection, 77.1W with 18CFM forced air 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION UL62368-1 MODEL RPD-65C RPD-65D OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 12V 5V 24V 5V RATED CURRENT 4.5A 1.2A 2.25A 1.2A CURRENT RANGE 0 ~ 5.8A 0 ~ 1.5A 0 ~ 2.9A 0 ~ 1.5A Rated load 3.75A Rated load PEAK LOAD OUTPUT Note.4 7.5A RATED POWER 60W OUTPUT POWER (max.) Rated output power for convection; 77.1W with 18CFM min. forced air 60W RIPPLE & NOISE (max.) Note.2 120mVp-p 50mVp-p 150mVp-p 50mVp-p ±5.0% VOLTAGE ADJ. RANGE CH1:11.4 ~ 12.8V VOLTAGE TOLERANCE Note.3 ±2.0% INPUT ±5.0% CH1:22.8 ~ 26.4V ±2.0% LINE REGULATION ±1.0% ±1.0% ±1.0% ±1.0% LOAD REGULATION ±2.0% ±5.0% ±2.0% ±5.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 20ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 79% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC (Note 5) OTHERS 127 ~370VDC 81% 0.9A/230VAC COLD START 25A/115VAC <1mA 50A/230VAC 90 ~ 125W output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1:27.6 ~ 32.4V CH1:13.8 ~ 16.2V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -20 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 MTBF 288.1K hrs min. MIL-HDBK-217F (25℃) 127*76*29mm (L*W*H) 0.24Kg; 63pcs/16Kg/1.28CUFT DIMENSION PACKING NOTE BS EN/EN62368-1 TPTC004 IEC62368-1 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RPD-65-SPEC 2021-09-15 PDF
Документация на RPD-65D 

RPD-65-20210915.cdr

Дата модификации: 15.09.2021

Размер: 79.9 Кб

3 стр.

RPD-65 65W Dual Output Switching Power Supply series Features : Universal AC input/Full range 12V or 24V high peak output current capability Optional L-Bracket and cover Low leakage current<1mA Protections:Short circuit/Over load/Over voltage 60W free air convection, 77W with 18CFM forced air 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL CH1 CH2 CH1 CH2 DC VOLTAGE 12V 5V 24V 5V RATED CURRENT 4.5A 1.2A 2.25A 1.2A CURRENT RANGE 0 ~ 5.8A 0 ~ 1.5A 0 ~ 2.9A 0 ~ 1.5A Rated load 3.75A Rated load PEAK LOAD OUTPUT RPD-65D RPD-65C OUTPUT NUMBER Note.4 7.5A RATED POWER 60W 60W OUTPUT POWER (max.) Rated output power for convection; 77W with 18CFM min. forced air RIPPLE & NOISE (max.) Note.2 120mVp-p 50mVp-p VOLTAGE ADJ. RANGE CH1:11.4 ~ 12.8V VOLTAGE TOLERANCE Note.3 2.0% INPUT 5.0% 150mVp-p CH1:22.8 ~ 26.4V 2.0% 50mVp-p 5.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 2.0% 5.0% 2.0% 5.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD TIME (Typ.) 20ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 79% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 127 ~370VDC 81% 0.9A/230VAC COLD START 25A/115VAC <1mA 50A/230VAC 90 ~ 125W output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1:27.6 ~ 32.4V CH1:13.8 ~ 16.2V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 ) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 4) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A MTBF 288.1K hrs min. MIL-HDBK-217F (25 ) PCB:127*76*28mm (L*W*H) with optional CASE:130*84.4*37mm (L*W*H) 0.24Kg; 63pcs/16Kg/1.35CUFT DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RPD-65-SPEC 2006-01-27 PDF
Документация на серию RPD-65 

RPD-65.cdr

Дата модификации: 07.02.2006

Размер: 344.6 Кб

2 стр.

    Товары серии RPD-65

    Наименование i Упаковка Выход U1 I1 КПД Шум
    RPD-65C (MW)
     
    		AC-DC сетевой преобразователь - P вых: 65 Вт; Выход: 12 В, 5 В; U1: 12 В; I1: до 5.8 А;... 7 шт
    RPD-65D (MW)
     
    		AC-DC сетевой преобразователь - P вых: 65 Вт; Выход: 24 В, 5 В; U1: 24 В; I1: до 2.9 А;... 1 шт