Серия AC-DC сетевых преобразователей PS-45

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности
	Типы защиты	КЗ, перегрузка, перенапряжение
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Размер	127×76×28 мм

Документация на серию PS-45

PS-45 45W Single Output Switching Power Supply series Features : Universal AC input/Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL OUTPUT INPUT PS-45-3.3 PS-45-5 PS-45-7.5 PS-45-12 PS-45-13.5 PS-45-15 PS-45-24 PS-45-27 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 8A 8A 5.4A 3.7A 3.3A 3A 1.9A 1.7A 1A CURRENT RANGE 0 ~ 10.7A 0 ~ 10.5A 0 ~ 7A 0 ~ 4.4A 0 ~ 3.9A 0 ~ 3.5A 0 ~ 2.2A 0 ~ 1.95A 0 ~ 1.1A RATED POWER 26.4W 40W 40.5W 44.4W 44.55W 45W 45.6W 45.9W 48W OUTPUT POWER (max.) Rated output power for convection; 52W (+3.3V : 35W) with 18 CFM min. 100mVp-p 100mVp-p 100mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p 3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE TIME 800ms, 30ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 69% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.8A/115VAC 127 ~370VDC 74% 75% 76% 77% 77% WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE COLD START 15A/115VAC <0.75mA / 240VAC 78% 30A/230VAC 55.2 ~ 64.8V -10 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 300.7K hrs min. MIL-HDBK-217F (25 ) 127*76*28mm (L*W*H) 0.19Kg; 72pcs/15.6Kg/1.35CUFT PACKING 78% Protection type : Hiccup mode, recovers automatically after fault condition is removed. WORKING TEMP. DIMENSION 78% 0.56A/230VAC 53 ~ 75W(3.3V : 36 ~ 55W) rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. 3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V OVER VOLTAGE NOTE 100mVp-p 1.0% PROTECTION OTHERS 100mVp-p 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.85V 14.25 ~ 16.5V 22.8 ~ 26.4V 25.65 ~ 29.7V 45.6 ~ 52.8V 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% LOAD REGULATION OVERLOAD (Note 4) 100mVp-p LINE REGULATION LEAKAGE CURRENT EMC 100mVp-p VOLTAGE ADJ. RANGE PS-45-48 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. File Name:PS-45-SPEC 2011-08-18 MeanWell Direct Tel: +44 (0)118 970 3858 E-mail: sales@meanwelldirect.co.uk  PDF

Документация на PS-45-7.5 

PS-45.cdr

Дата модификации: 14.08.2012

Размер: 801.8 Кб

2 стр.

PS-45 45W Single Output Switching Power Supply series Features : Universal AC input/Full range Low leakage current<0.5mA Protections:Short circuit/Over load/Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL PS-45-5 PS-45-7.5 PS-45-12 PS-45-13.5 PS-45-15 PS-45-24 PS-45-27 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 8A 8A 5.4A 3.7A 3.3A 3A 1.9A 1.7A 1A CURRENT RANGE 0 ~ 10.7A 0 ~ 10.5A 0 ~ 7A 0 ~ 4.4A 0 ~ 3.9A 0 ~ 3.5A 0 ~ 2.2A 0 ~ 1.95A 0 ~ 1.1A RATED POWER 26.4W 40W 40.5W 44.4W 44.6W 45W 45.6W 45.9W 48W OUTPUT POWER (max.) OUTPUT PS-45-3.3 DC VOLTAGE Rated output power for convection; 52W (+3.3V : 35W) with 18 CFM min. 100mVp-p 100mVp-p 100mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p 100mVp-p VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 100mVp-p 100mVp-p 100mVp-p PS-45-48 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.85V 14.25 ~ 16.5V 22.8 ~ 26.4V 25.65 ~ 29.7V 45.6 ~ 52.8V 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE TIME 800ms, 30ms at full load HOLD TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 69% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INPUT 0.8A/115VAC LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 127 ~370VDC 74% 75% 76% 77% 77% 78% 78% 78% 0.56A/230VAC COLD START 15A/115VAC <0.75mA / 240VAC 30A/230VAC 53 ~ 75W(3.3V : 36 ~ 55W) rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. 3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V 55.2 ~ 64.8V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 4) I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 300.7K hrs min. MIL-HDBK-217F (25 ) 127*76*28mm (L*W*H) 0.19Kg; 72pcs/15.6Kg/1.35CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:PS-45-SPEC 2006-01-27  PDF

Документация на серию PS-45 

PS-45.cdr

Дата модификации: 07.02.2006

Размер: 334.7 Кб

2 стр.

• найти PS-45.pdf

Товары серии PS-45

Наименование	i	Упаковка	P вых	Выход	U1	I1	КПД	Шум	T раб
PS-45-12 (MW)		в коробках 72 шт
PS-45-12 PBF (MW)				—		—	—	—
PS-45-13.5 (MW)		в коробках 8 шт
PS-45-15 (MW)		в коробках 72 шт
PS-45-15 PBF (MW)				—		—	—	—
PS-45-24 (MW)		72 шт
PS-45-27 (MW)		в коробках 8 шт
PS-45-27 PBF (MW)				—		—	—	—
PS-45-3.3 (MW)		в коробках 8 шт
PS-45-3.3 PBF (MW)				—		—	—	—
PS-45-48 (MW)		в коробках 8 шт
PS-45-48 PBF (MW)				—		—	—	—
PS-45-5 (MW)		1 шт
PS-45-5 PBF (MW)				—		—	—	—
PS-45-7.5 (MW)		в коробках 8 шт
PS-45-7.5 PBF (MW)				—		—	—	—

PS-45 публикации

23 января 2025

статья

Акустические компоненты Hitpoint – широкий выбор решений для различных проектов

Константин Кузьминов (г. Заполярный) Компания Hitpoint, специализирующаяся на производстве акустических компонентов, предлагает широкий выбор пьезодиафрагм, пьезоэлектрических и электромагнитных звукоизлучателей, а также динамиков и микрофонов.... ...читать

22 июля 2024

статья

Инструкция по работе с программаторами NFC и DALI/DMX для светодиодных драйверов MOSO

Компания Компэл предлагает складские и заказные поставки качественных светодиодных драйверов для индустриального, бытового, торгового, офисного и сценического освещения производства компании MOSO. В качестве дополнения к статьям об этих драйверах... ...читать