Серия LED-драйверов PLN-20

MEAN WELL

Общие характеристики

	Раздел	LED-драйверы
	Тип преобразователя
	Мощность выходная
	Напряжение сети/входное номинальное
	Режим стабилизации
	Тип диммирования
	Исполнение конструктивное
	Степень защиты (IP)
	Подстройка выходных параметров
	Диапазон входных напряжений (AC)
	Диапазон входных напряжений (DC)
	Напряжение изоляции вход-выход
	Количество выходов
	Коэффициент мощности
	Функция защиты	КЗ, перегрузка, перенапряжение, перегрев
	Температура рабочая
	Размер	148×38.5×28 мм
	Применение

Документация на серию PLN-20

PLN-20 20W Single Output LED Power Supply series ■ ‧ ‧ User’s Manual  ‧ ‧ ‧ ‧ ‧ ‧ ‧Ⅱ ‧ ‧ ‧ ‧ ‧  SPECIFICATION PLN-20-24 PLN-20-36 PLN-20-48 18V 24V 36V 48V CONSTANT CURRENT REGION Note.5 9 ~ 12V 1.6A RATED CURRENT 13.5 ~ 18V 18 ~ 24V 1.1A 0.8A 27 ~ 36V 0.55A 0.42A CURRENT RANGE CURRENT ADJ. RANGE 0 ~ 1.6A 0 ~ 1.1A 0 ~ 0.8A 0 ~ 0.55A 0 ~ 0.42A 75% ~ 100% 19.2W 19.8W 19.2W 19.8W 20.2W 3.0Vp-p 3.0Vp-p 3.0Vp-p 3.8Vp-p RIPPLE & NOISE (max.) Note.2 2.5Vp-p LINE REGULATION ±3.0% LOAD REGULATION ±10% 500ms / 230VAC 2000ms / 115VAC at full load Note.4 90 ~ 277VAC 127~392VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR EFFICIENCY(Typ.) PF≥0.95/115VAC,PF>0.9/230VAC,PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading≧75% at 115VAC/230VAC input and output loading≧75% at 277VAC input 83% 80% 83.5% 82% 81% AC CURRENT INRUSH CURRENT(Typ.) 0.4A/115VAC 0.2A/230VAC 0.15A/277VAC COLD START 35A(twidth=40μs measured at 50% Ipeak) at 230VAC TOTAL HARMONIC DISTORTION MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT OVER CURRENT Note.5 SHORT CIRCUIT 98 units (circuit breaker of type B) / 98 units (circuit breaker of type C) at 230VAC 0.5mA / 240VAC 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE Hiccup mode, recovers automatically after fault condition is removed. 27 ~ 34V 14 ~ 16V 19 ~ 22V Protection type : Shut off o/p voltage, clamping by zener diode OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. WORKING HUMIDITY -30 ~ +60℃ (Refer to "Derating Curve") ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 41 ~ 46V 54 ~ 60V 20 ~ 90% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.06%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS IEC61347-1, IEC61347-2-13, TUV BS EN/EN61347-1, BS EN/EN61347-2-13, UL8750,CSA C22.2 No. 250.0-08, EAC TP TC 004,GB19510.1,GB19510.14,IP64 approved WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 36 ~ 48V VOLTAGE TOLERANCE Note.3 ±10% VOLTAGE RANGE OTHERS ..  PLN-20-18 SETUP TIME EMC IP64 12V RATED POWER PROTECTION  PLN-20-12 DC VOLTAGE INPUT   MODEL OUTPUT  I/P-O/P:3.75KVAC I/P-O/P:100M Ohms/500VDC / 25℃/ 70%RH Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C(≥75% load);BS EN/EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN61547, light industry level, criteria A,EAC TP TC 020 643.6Khrs min. MIL-HDBK-217F (25℃) 148.5*38.5*28mm (L*W*H) 0.18Kg; 60pcs/12.8Kg/0.9CUFT ℃          ℃℃   ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PLN-20-SPEC 2021-12-24

Документация на PLN-20-48

PLN-20.cdr

Дата модификации: 27.12.2021

Размер: 541 Кб

3 стр.

PLN-20 20W Single Output LED Power Supply series Features : Universal AC input / Full range(up to 277VAC) Built-in constant current limiting circuit with adjustable OCP level Fully isolated plastic case Protections:Short circuit/Over load/Over voltage/Over temperature Built-in active PFC function IP64 design for indoor or outdoor installations Small and compact size Cooling by free air convection 100% full load burn-in test High reliability,low cost Suitable for Damp / wet locations Suitable for LED lighting and moving sign applications 2 years warranty F 110 M M SPECIFICATION MODEL DC VOLTAGE PLN-20-18 PLN-20-24 PLN-20-36 PLN-20-48 12V 18V 24V 36V 48V 13.5 ~ 18V 18 ~ 24V 1.1A 0.8A 27 ~ 36V 0.55A 0.42A 0 ~ 1.1A 0 ~ 0.8A 0 ~ 0.55A 0 ~ 0.42A 0 ~ 1.6A 75% ~ 100% 19.2W RATED POWER OUTPUT RIPPLE & NOISE (max.) Note.2 2.5Vp-p VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% 19.2W 19.8W 20.2W 3.0Vp-p 3.0Vp-p 3.8Vp-p Note.4 90 ~ 277VAC 82% 83% 83.5% 127~392VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR EFFICIENCY(Typ.) PF 0.9 at 75~100% load, 115VAC/230VAC 80% 81% AC CURRENT INRUSH CURRENT(max.) 0.4A/115VAC 40A/230VAC OVER CURRENT 0.2A/230VAC 0.5mA / 240VAC LEAKAGE CURRENT Note.5 SHORT CIRCUIT PROTECTION 19.8W 3.0Vp-p 2300ms / 230VAC 3000ms / 115VAC at full load SETUP TIME INPUT 36 ~ 48V 10% LOAD REGULATION VOLTAGE RANGE IP64 PLN-20-12 LED OPERATION VOLTAGE Note.5 9 ~ 12V 1.6A RATED CURRENT CURRENT RANGE CURRENT ADJ. RANGE SELV OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 27 ~ 34V 14 ~ 16V 19 ~ 22V Protection type : Shut off o/p voltage, clamping by zener diode 41 ~ 46V 54 ~ 60V 110 10 (TSW1) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +80 , 10 ~ 95% RH 0.06%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS IEC61347-1, IEC61347-2-13, TUV EN61347-1, EN61347-2-13, UL8750, IP64 approved EMI CONDUCTION & RADIATION Compliance to EN55015 Compliance to EN61000-3-2 Class C( 75% load);EN61000-3-3 SAFETY & HARMONIC CURRENT EMC Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547, light industry level, criteria A EMS IMMUNITY I/P-O/P:3.75KVAC WITHSTAND VOLTAGE ISOLATION RESISTANCE MTBF OTHERS DIMENSION PACKING NOTE I/P-O/P:100M Ohms/500VDC / 25 643.6Khrs min. / 70%RH MIL-HDBK-217F (25 ) 147*37*28mm (L*W*H) 0.18Kg; 60pcs/12.8Kg/0.9CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage, please check the static characteristic for more details. 5. Constant current operation region is within 75% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:PLN-20-SPEC 2010-05-31

Документация на серию PLN-20

PLN-20.cdr

Дата модификации: 09.06.2010

Размер: 161.4 Кб

2 стр.

найти PLN-20.pdf

Товары серии PLN-20

Наименование	i	Упаковка	Напряжение выходное	Ток выходной	Эффективность
PLN-20-12 (MW)		1 шт
PLN-20-18 (MW)		1 шт
PLN-20-24 (MW)		1 шт
PLN-20-36 (MW)		1 шт
PLN-20-48 (MW)		1 шт
PLN-20-5 (MW)