Серия AC-DC сетевых преобразователей DRH-120

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Выходная мощность (ном)
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности
	Типы защиты	КЗ, перегрузка, перенапряжение, перегрев
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Шум
	Размер	65.6×125.2×100 мм
	Рабочая температура

Документация на серию DRH-120

120W Single Output Industrial DIN RAIL Power Supply DRH-120 series ■ Features : Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Fixed switching frequency at 70KHz 3 years warranty SPECIFICATION MODEL OUTPUT DRH-120-24 DRH-120-48 DC VOLTAGE 24V 48V RATED CURRENT 5A 2.5A CURRENT RANGE 0 ~ 5A 0 ~2.5A RATED POWER 120W 120W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p VOLTAGE ADJ. RANGE 24 ~ 28V VOLTAGE TOLERANCE Note.3 ±1.0% 48 ~ 55V ±1.0% LINE REGULATION ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% SETUP, RISE, HOLD UP TIME 1700ms, 120ms, 16ms/400VAC INPUT VOLTAGE RANGE 340 ~ 550VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 85% AC CURRENT INRUSH CURRENT (max.) 0.65A/400VAC 0.6A/500VAC COLD START 50A LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE 86% <3.5mA / 530VAC 105 ~ 160% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 30 ~ 36V 59 ~ 66V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +60℃ (Refer to "Derating Curve") SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6 UL60950-1, EAC TP TC 004 approved, IEC60950-1 CB approved by SIQ I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011 (CISPR11), EN55032 (CISPR32), EN61204-3 Class B, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020 MTBF 178.7Khrs min. DIMENSION 65.5*125.2*100mm (W*H*D) 0.75Kg; 20pcs/16Kg/1.29CUFT PACKING NOTE 480 ~ 780VDC OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS 1000ms, 120ms, 30ms/500VAC at full load MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:DRH-120-SPEC 2018-01-12

Документация на DRH-120-48

DRH-120-20180112.cdr

Дата модификации: 09.01.2018

Размер: 65.2 Кб

2 стр.

120W Single Output Industrial DIN RAIL Power Supply DRH-120 series Features : Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 years warranty SPECIFICATION MODEL OUTPUT DRH-120-24 DRH-120-48 DC VOLTAGE 24V 48V RATED CURRENT 5A 2.5A CURRENT RANGE 0 ~ 5A 0 ~2.5A RATED POWER 120W 120W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p VOLTAGE ADJ. RANGE 48 ~ 55V 1.0% 24 ~ 28V VOLTAGE TOLERANCE Note.3 1.0% LINE REGULATION 0.5% LOAD REGULATION 0.5% 0.5% 0.5% SETUP, RISE, HOLD UP TIME 1700ms, 120ms, 16ms/400VAC INPUT VOLTAGE RANGE 340 ~ 550VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 85% AC CURRENT INRUSH CURRENT (max.) 0.65A/400VAC 0.6A/500VAC COLD START 50A LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) <3.5mA / 530VAC 5 (TSW) Detect on heatsink of power switch Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6 IEC60950-1 CB Approved by TUV I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A MTBF 178.7Khrs min. DIMENSION 65.5*125.2*100mm (W*H*D) 0.75Kg; 20pcs/16Kg/1.36CUFT PACKING NOTE 86% I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B EMS IMMUNITY OTHERS 480 ~ 780VDC 105 ~ 160% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 30 ~ 36V 59 ~ 66V Protection type : Shut down o/p voltage, re-power on to recover 85 OVER TEMPERATURE 1000ms, 120ms, 30ms/500VAC at full load MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:DRH-120-SPEC 2007-01-23

Документация на серию DRH-120

DRH-120.cdr

Дата модификации: 03.03.2007

Размер: 218.6 Кб

2 стр.

найти DRH-120.pdf

Товары серии DRH-120

Наименование	i	Упаковка	Выход	U1	I1	КПД
DRH-120-24 (MW)		в коробках 20 шт
DRH-120-24 PBF (MW)			—	—	—	—
DRH-120-48 (MW)		1 шт