Серия AC-DC сетевых преобразователей LMF200-23B15

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Выходная мощность (ном)
	Выход
	Напряжение 1 канала
	Выходной ток 1 канала
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности
	Типы защиты	КЗ, перегрузка, перенапряжение, перегрев
	Количество выходов
	Тип управления выходом
	Исполнение
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Применение
	КПД
	Размер	179×99×30 мм
	Рабочая температура

Документация на серию LMF200-23B15

AC/DC 200W Enclosed Switching Power Supply LMF200-23Bxx, LMF200-23Bxx-C, LMF200-23Bxx-Q Series FEATURES  Universal 85 - 305VAC or 120 - 430VDC Input voltage  Accepts AC or DC input (dual-use of same terminal)  Operating temperature range: -30℃ to +70℃  Built-in active PFC function  High I/O isolation test voltage up to 4000VAC  Output short circuit, over-current, over-voltage, over-temperature protection RoHS  LED indicator for power on Report UL62368-1 EN62368-1  Emissions meets CISPR32/EN55032 CLASS B  Start-up delay time less than 5 seconds at -30℃ GB4943.1  Operating altitude up to 5000m LMF200-23Bxx series is one of Mornsun’s enclosed AC-DC switching power supply. It features universal AC input and at the same time accepts DC input voltage, cost-effective, built-in active PFC function, high efficiency and high reliability. These converters offer excellent EMC performance and meet IEC/EN61000-4, CISPR32/EN55032, IEC/EN/UL62368, EN60335, GB4943 standards and they are widely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home etc. Selection Guide Part No.* Output Power (W) Nominal Output Voltage and Current (Vo/Io) Output Voltage Adjustable Range (V) Efficiency at 230VAC (%) Typ. Max. Capacitive Load (µF) LMF200-23B12 200.4 12V/16.7A 11.4-12.6 88.0 4000 LMF200-23B15 201.0 15V/13.4A 14.25-15.75 88.0 3300 24V/8.4A 22.8-25.2 90.0 1500 36V/5.6A 34.2-37.8 89.0 1000 48V/4.2A 45.6-50.4 89.0 470 Certification UL/EN/CCC LMF200-23B24 -- LMF200-23B36 UL/EN/CCC LMF200-23B48 201.6 Note: *Use suffix “C” for terminal with protective cover and suffix “Q” for conformal coating. Input Specifications Item Input Voltage Range Operating Conditions Min. Typ. Max. Unit AC input 85 -- 305 VAC DC input 120 -- 430 VDC 47 -- 63 Hz 115VAC -- 2.5 3.0 230VAC -- 1.3 2.0 115VAC -- 35 -- -- 65 -- -- 0.98 -- -- 0.95 -- Input Voltage Frequency Input Current Input Inrush Current Power Factor 230VAC 115VAC 230VAC Cold start At full load Hot Plug A -- Unavailable Output Specifications Item Operating Conditions Output Voltage Accuracy Min. Typ. Max. Full load range -- ±1 -- Line Regulation Rated load -- ±0.5 -- Load Regulation 230VAC, 0% - 100% load Output Ripple & Noise* 20MHz bandwidth (peak-to-peak value) -- ±0.5 -- 12V/15V/24V -- 150 -- 36V/48V -- 240 -- 2021.11.03-A/4 Unit % mV Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation  PDF

Документация на LMF200-23B48-Q 

LMF200-23Bxx_EN Keywords:

Дата модификации: 03.11.2021

Размер: 1.71 Мб

5 стр.

• найти LMF200-23B15.pdf

Товары серии LMF200-23B15