Вход / Регистрация

Серия DC-DC модульных преобразователей IB05_LS-1WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Выходная мощность
Количество каналов
Входное напряжение
Возможности
Комплекс защит
Номинальное входное напряжение
КПД
Напряжение изоляции вход-выход
Размер 19.65×6×10.16 мм
Рабочая температура

Документация на серию IB05_LS-1WR3

DC/DC Converter IB05_LS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, regulated single output  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 73%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out CB Report RoHS Patent Protection UL 62368-1 EN 62368-1 BS EN 62368-1 IEC 62368-1  SIP package IB05_LS-1WR3 series is especially designed for distributed power supply systems where an isolated voltage is required. They are suitable for occasions of: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Output Input Voltage (VDC) Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF) Max. IB0503LS-1WR3 3.3 250/25 63/67 2400 IB0505LS-1WR3 5 200/20 66/70 2400 9 111/12 67/71 1000 Certification Part No. EN/BS EN UL/EN/BS EN/IEC EN/BS EN IB0509LS-1WR3 IB0512LS-1WR3 Nominal (Range) 5 (4.75-5.25) 12 84/9 68/72 560 IB0515LS-1WR3 15 67/7 69/73 560 IB0524LS-1WR3 24 41/4 69/73 100 Input Specifications Item Operating Conditions Min. Typ. Max. 3.3VDC/5VDC output -- 286/5 303/10 Input Current (full load / no-load) 9VDC/12VDC output -- 282/12 299/20 -- 274/18 290/30 15 -- 15VDC/24VDC output Reflected Ripple Current* -- Input Filter Unit mA Capacitor Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Voltage Accuracy Linear Regulation Input voltage change: ±1% Load Regulation 10%-100% load Ripple & Noise* 20MHz bandwidth Temperature Coefficient 100% load Short-circuit Protection Min. Typ. Max. -- -- ±3 -- -- ±0.25 3.3VDC output -- -- ±3 Others -- -- ±2 Others -- 30 75 24V output -- 50 100 ±0.02 -- -- Unit % mVp-p %/℃ Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. 2022.01.14-A/9 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на IB0515LS-1WR3 

IB05_LS-1WR3 Keywords:

Дата модификации: 14.01.2022

Размер: 1.2 Мб

4 стр.

DC/DC Converter IB05_LS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage and regulated single output  Continuous short-circuit protection  No-load input current as low as 5mA  Operating ambient temperature range: -40℃ ~ +85℃  High efficiency up to 73%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out  SIP package CB Patent Protection RoHS  IEC62368, UL62368, EN62368 approved IB05_LS-1WR3 series is especially designed for distributed power supply systems where an isolated voltage is required. They are suitable for occasions of : pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Output Input Voltage (VDC) Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF) Max. IB0503LS-1WR3 3.3 250/25 63/67 2400 IB0505LS-1WR3 5 200/20 66/70 2400 9 111/12 67/71 1000 Certification Part No. CE UL/CE/CB CE IB0509LS-1WR3 IB0512LS-1WR3 Nominal (Range) 5 (4.75-5.25) 12 84/9 68/72 560 IB0515LS-1WR3 15 67/7 69/73 560 IB0524LS-1WR3 24 41/4 69/73 100 Input Specifications Item Input Current (full load / no-load) Operating Conditions Min. Typ. Max. 3.3VDC/5VDC output -- 286/5 303/10 9VDC/12VDC output -- 282/12 299/20 15VDC/24VDC output -- 274/18 290/30 15 -- Reflected Ripple Current* -- Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Voltage Accuracy Linear Regulation Input voltage change: ±1% Load Regulation 10%-100% load Ripple & Noise* 20MHz bandwidth Temperature Coefficient 100% load Short-circuit Protection Min. Typ. Max. -- -- ±3 % % -- -- ±0.25 3.3VDC output -- -- ±3 Others -- -- ±2 Others -- 30 75 24V output -- 50 100 ±0.02 -- -- Unit % mVp-p %/℃ Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information. 2019.02.21-A/7 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию IB05_LS-1WR3 

IB05_LS-1WR3 Keywords:

Дата модификации: 21.02.2019

Размер: 616.5 Кб

4 стр.

    Товары серии IB05_LS-1WR3

    Наименование i Упаковка Монтаж Выход U1 I1
    IB0503LS-1WR3 (MORNSUN)
     
    		в линейках 150 шт
    IB0505LS-1WR3 (MORNSUN)
     
    		в линейках 170 шт
    IB0509LS-1WR3 (MORNSUN)
     
    		1 шт
    IB0512LS-1WR3 (MORNSUN)
     
    IB0515LS-1WR3 (MORNSUN)