Серия оптических датчиков положения KTIR0611

Общие характеристики

	Раздел	Датчики положения оптические
	Рабочее расстояние
	Способ монтажа
	Ток излучателя (ном)
	Коммутируемое напряжение (макс)
	Коммутируемый ток (макс)
	Ток потребления (ном)
	Рабочее напряжение (ном)
	Размер	14×6.1×10 мм
	Рабочая температура

Документация на серию KTIR0611

PHOTO-INTERRUPTER Part Number: KTIR0611S Package Dimensions Features ● Ultra-small. ● Minimal influence from stray light. ● Low collector-emitter saturation voltage. ● RoHS Compliant. Applications ●Optical control equipment. ●Cameras. ●Floppy disk drives. K g in g i r b t h Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. *Absolute Maximum Ratings(Ta=25°C) Symbol Rating Unit Forward current IF 50 mA Reverse voltage VR 6 V Power dissipation Pd 75 mW Peak Forward Current (Pulse Width ≤100uS, Duty Cycle =1%) IFP 1 A Collector-emitter voltage VCEO 35 V Emitter-collector voltage VECO 6 V Collector current IC 20 mA Collector power dissipation PC 75 mW Operating temperature Topr -25~+85 ºC Storage temperature Tstg -40~+100 ºC soldering temperature (1/16 inch from body for 5 seconds) Tsol 260 ºC Parameter Input Output Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAC1844 REV NO: V.13 DATE: MAY/05/2018 PAGE: 1 OF 4 APPROVED: Wynec CHECKED: Tracy Deng DRAWN: L.T.Zhang ERP: 1105000004  PDF

Документация на KTIR0611S 

KTIR0611S(Ver.13)

Дата модификации: 05.05.2018

Размер: 326.2 Кб

4 стр.

• найти KTIR0611.pdf

Товары серии KTIR0611

Наименование	i	Упаковка
KTIR0611S (KGB)		200 шт