Серия магниточувствительных датчиков CHA93

Общие характеристики

Раздел Датчик магниточувствительный
Тип датчика Переключатель на основе датчика Холла, омниполярный
Рабочая температура
Применение Фиксация приближения магнита (датчик вскрытия порогового магнитного поля)

Документация на серию CHA93

Cosemitech CHA93X/CHI93X Automotive Product Group This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice and Cosemitech assumes no obligation for future manufacture of this product. Contact Cosemitech for the latest status. Preliminary Datasheet 1.3 FEATURES and FUNCTIONAL DIAGRAM • • • • • • • • • • • • • • AEC-Q100 automotive qualified for CHA93X Digital Omnipolar-Switch Hall Sensor Superior Temperature Stability Multiple Sensitivity Options (BOP / BRP): ±25 / ±15 Gauss; ±70 /±35 Gauss; ±100/ ±50 Gauss; On board voltage regulator for 2.5V to 22V range Open Drain Output (25 mA Sink) Resistant to physical stress Output short-circuit protection Operation from unregulated supply Reverse-battery and freewheeling protection Solid-state reliability Wide Operating temperature range: -40 to 150 oC Small package sizes TO-92S, SOT-23 and SOT-89 RoHS-compliant material meets directive 2011/65/EU PACKAGE ⚫ TO-92S SOT-23-3L SOT-89-3L APPLICATIONS -Docking Detection -Door Open and Close Detection -Proximity Sensing -Valve Positioning -Pulse Counting -Flow rate sensing -Robotic control (cylinder position monitoring) -Float-based fluid level sensing -Speed and RPM sensing in fitness equipment DESCRIPTION The CHA93X/CHI93X Hall-effect sensor is extremely temperature-stable and stress-resistant sensor ICs, especially suited for operation over extended temperature ranges from -40°C to 150°C. Superior high temperature performance is possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. The device includes a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. An on-board regulator permits operation with supply voltages of 2.5 to 22 V. The advantage of operating down to 2.5V is that the device can used in 2.5V applications or with additional external resistance in series with the supply pin for greater protection against high-voltage transient events. The CHA93X/CHI93X series is digital Omnipolar Hall switch. When the applied magnetic flux density exceeds the BOP threshold, the chip open-drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The CHA93X/CHI93X also integrated internal clamps against supply/output transients; output short circuits protection; reverse battery conditions. Three package styles provide a magnetically optimized package for most applications, SOT-23, TO-92S and SOT-89. Each package type is lead (Pb) free (suffix, –T), with a 100% matte-tin-plated lead-frame. Page 1/14 PDF
Документация на CHA931SR 

CH93X_datasheet

Дата модификации: 28.07.2021

Размер: 813.8 Кб

14 стр.

    Товары серии CHA93

    Наименование i Упаковка Корпус Монтаж
    CHA931ER (COSEMI)
     
     
    SOT893L
    CHA931SR (COSEMI)
     
     
    в ленте 3000 шт SOT233L
    CHA931TB (COSEMI)
     
     
    TO92S
    CHA932ER (COSEMI)
     
     
    SOT893L
    CHA932SR (COSEMI)
     
     
    в ленте 5 шт SOT233L
    CHA932TB (COSEMI)
     
     
    TO92S
    CHA933ER (COSEMI)
     
     
    SOT893L
    CHA933SR (COSEMI)
     
     
    SOT233L
    CHA933TB (COSEMI)
     
     
    TO92S

    CHA93 публикации

    19 сентября 2023
    новость

    Датчики Cosemi появились на складе КОМПЭЛ

    На склад пришла партия датчиков Холла известного китайского бренда Cosemi. Среди поступившей продукции: простые датчики магнитного поля; датчики магнитного поля с линейным выходом; датчики тока с линейным выходом. Датчики магнитного поля с... ...читать