Вход / Регистрация

Серия магниточувствительных датчиков CH44XP

Cosemi

Общие характеристики

 Раздел Датчик магниточувствительный
Тип датчика Датчик Холла с защелкой, цифровой
Рабочая температура
Применение Фиксация приближения магнита (датчик вскрытия порогового магнитного поля)

Документация на серию CH44XP

CHA44XP/CH44XP Revised Dec 2021 CH44xP / CHA44xP Hall-Effect Latching Sensor Family with Excellent Magnetic Parameter Performance Over Temperature and Internal Pull-Up Resistor Features • • • • • • • • • • • • • • AEC-Q100 automotive qualified for CHA44XP Build in 10K ohm output pull up resistor Multiple Sensitivity Options (BOP / BRP): +15 / -15 Gs; +30 / -30 Gs; +45 / -45 Gs; +120 / -120 Gs; Chopper stabilization for stable operate points throughout operating temperature range Operation supply voltage 2.5V to 5.5V Absolute maximum supply 24V Resistant to physical stress Output short-circuit protection Operation from unregulated supply Reverse-battery protection -22V Freewheeling protection Solid-state reliability Wide Operating temperature range: -40 to 150 oC Package options: TO-92S, SOT-23, SOT-89 and DFN Functional Block Diagram Package ⚫ TO-92S SOT23-3L SOT89-3L (by request) DFN-3L (preliminary) Application • • • • • • Car seat motor position sensor BLDC motor commutation Car window position sensor Flow-rate sensing Motor and fan control Tiny motor position sensor Description The CHA44XP/CH44XP Hall-effect sensor is extremely temperature-stable and stress-resistant sensor ICs, well suited for operation over extended temperature ranges from -40°C to 150°C. Superior high temperature performance is possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress. The device includes a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. It also integrated internal clamps against supply/output transients; output short circuits protection; reverse battery conditions. The advantage of operating down to 2.5V is that the device can used in 2.5V applications or with additional external resistance in series with the supply pin for greater protection against high-voltage transient events. The CHA44XP/CH44XP series is latch Hall switch. For the latch mode, there are also invert polarity devices. Normally a south pole of sufficient strength turns on the output; However, for invert polarity devices, a north pole of sufficient strength turns on the output. Page 1/16 PDF
Документация на CHA441PSR 

Дата модификации: 28.12.2021

Размер: 1.07 Мб

16 стр.

    Товары серии CH44XP

    Наименование i Упаковка Корпус Монтаж
    CH441PER (COSEMI)
     
     
    		 SOT893L
    CH441PNDR (COSEMI)
     
     
    		 DFN3
    CH441PNER (COSEMI)
     
     
    		 SOT893L
    CH441PNSR (COSEMI)
     
     
    		 SOT233L
    CH441PNTB (COSEMI)
     
     
    		 TO92S
    CH441PSR (COSEMI)
     
     
    		 SOT233L
    CH441PTB (COSEMI)
     
     
    		 20 шт TO92S
    CH442PER (COSEMI)
     
     
    		 SOT893L
    CH442PNER (COSEMI)
     
     
    		 SOT893L
    CH442PNSR (COSEMI)
     
     
    		 SOT233L
    CH442PNTB (COSEMI)
     
     
    		 TO92S
    CH442PSR (COSEMI)
     
     
    		 SOT233L
    CH442PTB (COSEMI)
     
     
    		 TO92S
    CH443PER (COSEMI)
     
     
    		 SOT893L
    CH443PNER (COSEMI)
     
     
    		 SOT893L
    CH443PNSR (COSEMI)
     
     
    		 SOT233L
    CH443PNTB (COSEMI)
     
     
    		 TO92S
    CH443PSR (COSEMI)
     
     
    		 SOT233L
    CH443PTB (COSEMI)
     
     
    		 TO92S
    CH444PER (COSEMI)
     
     
    		 SOT893L
    CH444PNER (COSEMI)
     
     
    		 SOT893L
    CH444PNSR (COSEMI)
     
     
    		 SOT233L
    CH444PNTB (COSEMI)
     
     
    		 TO92S
    CH444PSR (COSEMI)
     
     
    		 SOT233L
    CH444PTB (COSEMI)
     
     
    		 TO92S